Answer:
Talcum powder!
Explanation:
How to find the source of an oil leak:
This method simply involves using Talcum Powder as a visual aid to help pinpoint the location of an oil leak,
so you use Talcum powder for small oil leak :]
Have a wonderful day!
Answer:
Speed=1.633 m/s
Force= 20 N
Explanation:
Ideally, hence where v is the speed of collar, m is the mass of collar, k is spring constant and s is the displacement.
In this case, s=100-0=100mm=0.1m since 1 m is equivalent to 1000mm
k is given as 200 N/m and mass is 0.75 Kg
Substituting the given values
Therefore, <u>the speed is 1.633 m/s</u>
The sum of vertical forces is given by mg where g is acceleration due to gravity and it's value taken as
Therefore,
The sum of forces in normal direction is given by therefore
Therefore, <u>normal force on the rod is 20 N</u>
Answer:
A pneumatic system is a system that uses compressed air to transmit and control energy. ... Most pneumatic systems rely on a constant supply of compressed air to make them work. This is provided by an air compressor. The compressor sucks in air from the atmosphere and stores it in a high pressure tank called a receiver.
Explanation:
thank me later
secondary field of study that is not required is known as a minor
Hope this helps u :)
Answer: The overhead percentage is 7.7%.
Explanation:
We call overhead, to all those bytes that are delivered to the physical layer, that don't carry real data.
We are told that we have 700 bytes of application data, so all the other bytes are simply overhead, i.e. , 58 bytes composed by the transport layer header, the network layer header, the 14 byte header at the data link layer and the 4 byte trailer at the data link layer.
So, in order to assess the overhead percentage, we divide the overhead bytes between the total quantity of bytes sent to the physical layer, as follows:
OH % = (58 / 758) * 100 = 7.7 %