Answer:
(a) 
(b) 
Explanation:
Part (a)
The total length of copper cord L=86.3 m
The cross sectional area A=1.71×10⁻⁶m²
The resistivity of copper p=1.72×10⁻⁸Ω
Thus the resistance of extension cord is
Part (b)
The resistance of trimmer Rt=17.9 ohms
When voltage of 120V is applied then the current I is passing through series circuit is
Thus the voltage across the trimmer is:
Answer:
Explanation:
Speed given = 125 m /min
125 /60 m /s
In 450 second it will travel
= 450 x 125 / 60
=937.5 m.
As the distance is covered in less than 450 seconds , The distance must be less than 937.5 m
In 400 seconds , it will travel
= 400 x 125 / 60
833.33 m
Since the distance is covered in more than 400 seconds , the distance must be more than ie 833.33 .
Hence the distance covered is more than .833 m but less than 937.5
In either case these distance are more than .8 km .
Answer:
1- b: 2- a : 3- c : 4- d
Explanation:
it starts 2 move away from strting point, then no motion, then moves toward the start, the slows up.
<span>The first stage in the Gas model of stress is alarm and
mobilization. So the correct option in regards to the given question is option “d”.
Hans Selye is the person that evolved this model and he has explained this
model in complete details. He has broken
down his model into three stages. The first stage involves alarm and
mobilization. The second stage includes resistance. The third and the final
stage include the exhaustion stage. These are the stages that an organism goes
through to restore back the balance when stress is exerted from outside. </span>
Answer:
The wires are connected to both terminals of the battery, so they form a closed loop. Most circuits have devices such as light bulbs that convert electrical energy to other forms of energy. ... When the switch is turned on, the circuit is closed and current can flow through it.
Explanation:
