Strong alien you got there good luck bud you never asked a question
Answer:
5.09 x 10⁵ Nm²/C
Explanation:
The electric flux φ through a planar area is defined as the electric field Ε times the component of the area Α perpendicular to the field. i.e
φ = E A
From the question;
E = (8.0j + 2.0k) ✕ 10³ N/C
r = radius of the circular area = 9.0m
A = area of a circle = π r² [Take π = 3.142]
A = 3.142 x 9² = 254.502m²
Now, since the area lies in the x-y plane, only the z-component of the electric field is responsible for the electric flux through the circular area.
Therefore;
φ = (2.0) x 10³ x 254.502
φ = 5.09 x 10⁵ Nm²/C
The electric flux is 5.09 x 10⁵ Nm²/C
Answer:
0.2286 m, 0.686 m and 1,143 m
therefore we see that there is respect even where the intensity is minimal
Explanation:
Destructive interference to the two speakers is described by the expression
Δr = (2n +1) λ/2
where r is the distance, λ the wavelength and n an integer indicating the order of the interference
let's locate the origin on the left speaker
let's find the wavelength with the equation
v = λ f
λ = v / f
we substitute
Δr = (2n + 1) v / 2f
let's calculate for difference values of n
Δr = (2n +1) 343/(2 750)
Δr = (2n + 1) 0.2286
we locate the different values for a minimum of interim
n Δr (m)
0 0.2286
1 0.686
2 1,143
therefore we see that there is respect even where the intensity is minimal
Part (a):
1- Since the resistors are in series, therefore, the total resistance is the summation of the two resistors.
Therefore:
Rtotal = R1 + R2 = 3.11 + 6.15 = 9.26 ohm
2- Since the two resistors are in series, therefore, the current flowing in both is the same. We will use ohm's law to get the current as follows:
V = I*R
V is the voltage of the battery = 24 v
I is the current we want to get
R is the total resistance = 9.26 ohm
Therefore:
24 = 9.26*I
I = 24 / 9.26
I = 2.59 ampere
Part (b):
To get the voltage across the second resistor, we will again use Ohm's law as follows:
V = I*R
V is the voltage we want to get
I is the current in the second resistor = 2.59 ampere
R is the value of the second resistor = 6.15 ohm
Therefore:
V = I*R
V = 2.59 * 6.15
V = 15.9285 volts
Hope this helps :)
The blue line with triangles are a cold front. The red line with half circles are a warm front. The black H is high pressure. The black L is low pressure. The black dot is overcast skies. Finally the white circle with a line down and 4 lines off of that line is 40-knot wind
idk and dont understand
