Through which one of the following mediums is the velocity of a sound wave the greatest?

If a 60-watt bulb is used to light a room, how much current is flowing through the bulb given that the voltage is 120 volts?

Pavel [41]

Well, if I understand correctly, I think it'd be 60, because 60+60= 120, but I may be wrong. It's not my best subject, but why not try to help even though I suck lol.

3 0

3 years ago

How does laser works ?<br>

erastova [34]

Explanation:

Lasers produce a narrow beam of light in which all of the light waves have very similar wavelengths. The laser's light waves travel together with their peaks all lined up, or in phase. This is why laser beams are very narrow, very bright, and can be focused into a very tiny spot.

6 0

3 years ago

Please Someone Help Me...

goldenfox [79]

Answer:

Hi myself Shrushtee.

Explanation:

The fuse is connected to the live wire so that the appliance will not become charged (have a potential difference of 230 V) after the fuse has melted due to excessive current. Fuses must be fitted onto the live wire so that when it blows, it will disconnect (isolate) the appliance from the high voltage live wire.

6 0

3 years ago

1) draw a simple circuit with a voltage source and four resistors wired in series

Norma-Jean [14]

Answer:

1)

In this circuit (see attachment #1), we have:

- A voltage source: in this case, we choose a battery. A voltage source is a device producing an electromotive force (in a battery, this is done by means of a chemical reaction), which is responsible for "pushing" the electrons along the circuit and creating a current. The electromotive force (emf) of the battery is also called voltage, and it is indicated with the letter V.

- Four resistors: a resistor is a device which opposes to the flow of current. The property that describes by "how much" the resistor "opposes" to the flow of current is called "resistance", and it is indicated with the letter R.

- In this circuit, the 4 resistors are in series. Resistors are said to be in series when they are connected along the same branch of the circuit, so that the same current flow across each of them.

- For resistors in series, the equivalent resistance of the circuit is given by the sum of the individual resistances:

$R=R_1+R_2+...+R_n$

2)

In this circuit (see attachment #2), we have:

- A voltage source: as before, we have chosen a battery, providing an electromotive force to the circuit

- Three resistors wired in parallel. Resistors are said to be connected in parallel when they are connected along different branches, but with their terminals connected to the same point, so that each of them has the same potential difference across it.

- For resistors in parallel, the equivalent resistance of the circuit is calculated using the formula:

$\frac{1}{R}=\frac{1}{R_1}+\frac{1}{R_2}+...+\frac{1}{R_n}$

3)

In this circuit (see attachment #3), we have:

- A voltage source (again, we have choosen a battery)

- Three resistors, of which:

-- 2 of them are connected in parallel with each other

-- the 3rd one it is in series with the first two

If we call $R_1,R_2$ the resistances of the first 2 resistors in parallel, their equivalent resistance is:

$\frac{1}{R_{12}}=\frac{1}{R_1}+\frac{1}{R_2}\\\rightarrow R_{12}=\frac{R_1 R_2}{R_1+R_2}$

Then, these two resistors are connected in series with resistor $R_3$ ; and so, the total resistance of this circuit will be:

$R=R_{12}+R_3=\frac{R_1R_2}{R_1+R_2}+R_3=\frac{R_1R_2+R_3(R_1+R_2)}{R_1+R_2}$

4)

In this circuit (see attachment #4), we have:

- A voltage source (again, a battery)

- We have 6 resistors, which are arranged as follows:

-- Two branches each containing 3 resistors

-- The two branches are in parallel with each other

So, the total resistance of the two branches are:

$R_{123}=R_1+R_2+R_3$

$R_{456}=R_4+R_5+R_6$

And since the two branches are in parallel, their total resistance will be:

$\frac{1}{R}=\frac{1}{R_{123}}+\frac{1}{R_{456}}\\\rightarrow R=\frac{R_{123}R_{456}}{R_{123}+R_{456}}=\frac{(R_1+R_2+R_3)(R_4+R_5+R_6)}{R_1+R_2+R_3+R_4+R_5+R_6}$

4 0

3 years ago

Water is considered a polar molecule because _____.

Mashutka [201]

<span>The question is asking for the reason why water is considered a polar molecule. The correct option is A. Water molecule is a polar molecule because it has one side which is positively charged and the other side is negatively charged. Each molecule of water has two hydrogen atom and one oxygen atom. The slight negative charge near the oxygen atom attract nearby hydrogen atoms from water and the slightly positive charge of the hydrogen atom attract oxygen atom. The attraction set up by these charges are responsible for the polarity of water molecules. </span>

4 0

4 years ago

Read 2 more answers