All categories

4 years ago

What gas is the líquid water turning intro?

Physics

1 answer:

Masteriza [31]4 years ago

5 0

The liquid water goes through a stage called the gaseous state. Where the water evaporates into gas.

You might be interested in

(a) What is the cost of heating a hot tub containing 1440 kg of water from 10.0°C to 40.0°C, assuming 75.0% efficiency to take h

BaLLatris [955]

Answer:

a) $E = 6.024\,USD$ , For m kilograms, it is 4184m J., 3600000 joules, b) $i = 88.200\,A$

Explanation:

a) The amount of heat needed to warm water is given by the following expression:

$Q_{needed} = m_{w}\cdot c_{w}\cdot (T_{f}-T_{i})$

Where:

$m_{w}$ - Mass of water, measured in kilograms.

$c_{w}$ - Specific heat of water, measured in $\frac{J}{kg\cdot ^{\circ}C}$ .

$T_{f}$ , $T_{i}$ - Initial and final temperatures, measured in $^{\circ}C$ .

Then,

$Q_{needed} = (1440\,kg)\cdot \left(4184\,\frac{J}{kg\cdot ^{\circ}C} \right)\cdot (40^{\circ}C - 10^{\circ}C)$

$Q_{needed} = 180748800\,J$

The energy needed in kilowatt-hours is:

$Q_{needed} = 180748800\,J\times \left(\frac{1}{3600000}\,\frac{kWh}{J} \right)$

$Q_{needed} = 50.208\,kWh$

The electric energy required to heat up the water is:

$E = \frac{50.208\,kWh}{0.75}$

$E = 66.944\,kWh$

Lastly, the cost of heating a hot tub is: (USD - US dollars)

$E = (66.944\,kWh)\cdot \left(0.09\,\frac{USD}{kWh} \right)$

$E = 6.024\,USD$

The heat needed to raise the temperature a degree of a kilogram of water is 4184 J. For m kilograms, it is 4184m J. Besides, a kilowatt-hour is equal to 3600000 joules.

b) The current required for the electric heater is:

$i = \frac{Q_{needed}}{\eta \cdot \Delta V \cdot \Delta t}$

$i = \frac{180748800\,J}{0.75\cdot (220\,V)\cdot (3.45\,h)\cdot \left(3600\,\frac{s}{h} \right)}$

$i = 88.200\,A$

7 0

3 years ago

A block of wood is floating in water; it is depressed slightly and then released to oscillate up and down. Assume that the top a

Marysya12 [62]

Explanation:

Equilibrium position in y direction:

W = Fb (Weight of the block is equal to buoyant force)

m*g = V*p*g

V under water = A*h

hence,

m = A*h*p

Using Newton 2nd Law

$-m*\frac{d^2y}{dt^2} = Fb - W\\\\-m*\frac{d^2y}{dt^2} = p*g*(h+y)*A - A*h*p*g\\\\-A*h*p*\frac{d^2y}{dt^2} = y *p*A*g\\\\\frac{d^2y}{dt^2} + \frac{g}{h} * y =0$

Hence, T time period

T = 2*pi*sqrt ( h / g )

4 0

4 years ago

Solvents are the substances that dissolve solutes; therefore, solvents are always liquids.

Nina [5.8K]

False, although they are usually a liquid. Solvents can be a solid or gas as well. Also, solutes can be in any state as well.

4 0

3 years ago

9. A wave on Beaver Dam Lake passes by two docks that are 40.0 m apart.

Kobotan [32]

Answers:

a) 10 m

b) time=1.6 s, frquency=0.625 Hz

c) 6.25 m/s

Explanation:

a) If there is a crest at each dock and another three crests between the two docks, and the wavelength $\lambda$ is the distance between to crests; this means we have $4\lambda$ in $40 m$ :