Answer:
Efficiency = 80%
Explanation:
Given the following data;
Work output = 240 N
Work Input = 300 N
To find the mechanical efficiency of a machine;
Substituting into the equation, we have;
Efficiency = 80%
Therefore, the mechanical efficiency of the machine is 80 percent.
Explanation:
It is given that,
Diameter of loop, d = 1.4 cm
Radius of loop, r = 0.7 cm = 0.007 m
Magnetic field, 
(A) Magnetic field of a current loop is given by :
I is the current in the loop
I = 27.85 A
(B) Magnetic field at a distance r from a wire is given by :
r = 0.00222 m
Hence, this is the required solution.
a.) Plants that thrive in the shade are often able to hold on to sunlight for extensive periods of time; they're in a sense like the camels of the plaNt WoRld.
b.) Though artificial lights are not nearly as beneficial as the sun, one could invest in one of them plant growing light thingies, but sun-loving plants might be sad if u do this instead of letting them soak in ePic rays from the sun.
<span>light colored and smooth surface would most likely be the best reflector of electromagnetic energy.Light, shiny surfaces are the best reflectors of radiation and they will allow the waves to reflect and bounce off rather than absorb. we can consider mirror as the example ,it will only reflect the light energy falling on them and it will not absorb. The darker coloured and rough surfaced substances will definitely absorb some amount of light falling on it. so light coloured smooth or shiny surfaced material would be the best reflector for electromagnetic energy.</span>
Answer:
The car manufacturers could increase bore of the cylinders, place the engine in the center or back of the car, add 1 to 2 turbochargers, and lower the center of gravity of the vehicle to increase traction.
Explanation:
Turbochargers would be recommended because they significantly increase both the torque of the engine as well as the amount of horses powering the car while also increasing original efficiency both with and without the additional power. Weight adjustment allows for lightweight vehicles with good traction. This is important to both keep control of the car under acceleration, but it also makes the vehicle more efficient due to the now sheddable unnecessary weight. A more obvious approach would be to increase the base horsepower and torque of the engine by increasing the bore of the cylinders and the weight of the pistons. This acts as an inertial lever, because the extra piston weight will drag the crankshaft faster. This could also be achieved by taking away piston weight, but this could be catastrophic should a piston slip.
