All categories

4 years ago

Sophia is designing a new welding shop for the local high school. Where should the compressed gas and fuel cylinders be stored?

1 answer:

4 0

Administrative law is part of the so called ‘public law’. It is the ‘common’ law of the public administration and it is broadly a statutory law. The administrative legal system collects concepts and institutions from other legal systems such as civil law, criminal law, or even labour law. In addition, it is self-sufficient; there is no need to bring rules from other areas of law to fill in the gaps.

You might be interested in

Oxygen combines with nitrogen in the air to form NOx at about

rusak2 [61]

B) Oxygen combines with nitrogen in the air to form NOx at about 2500 degrees Fahrenheit.

4 0

3 years ago

Read 2 more answers

A 0.25in diameter steel rod BC is securely attached between two identical 1in diameter copper rods (AB and CD). Find the torque

Helen [10]

Answer:

Tmax= 46.0 lb-in

Explanation:

Given:

- The diameter of the steel rod BC d1 = 0.25 in

- The diameter of the copper rod AB and CD d2 = 1 in

- Allowable shear stress of steel τ_s = 15ksi

- Allowable shear stress of copper τ_c = 12ksi

Find:

Find the torque T_max

Solution:

- The relation of allowable shear stress is given by:

τ = 16*T / pi*d^3

T = τ*pi*d^3 / 16

- Design Torque T for Copper rod:

T_c = τ_c*pi*d_c^3 / 16

T_c = 12*1000*pi*1^3 / 16

T_c = 2356.2 lb.in

- Design Torque T for Steel rod:

T_s = τ_s*pi*d_s^3 / 16

T_s = 15*1000*pi*0.25^3 / 16

T_s = 46.02 lb.in

- The design torque must conform to the allowable shear stress for both copper and steel. The maximum allowable would be:

T = min ( 2356.2 , 46.02 )

T = 46.02 lb-in

6 0

3 years ago

The structure of a house is such that it loses heat at a rate of 4500kJ/h per °C difference between the indoors and outdoors. A

adelina 88 [10]

Answer:

15.24°C

Explanation:

The quality of any heat pump pumping heat from cold to hot place is determined by its coefficient of performance (COP) defined as

$COP=\frac{Q_{in}}{W}$

Where Q_{in} is heat delivered into the hot place, in this case, the house, and W is the work used to pump heat

You can think of this quantity as similar to heat engine's efficiency

In our case, the COP of our heater is

$COP_{heater} = \frac{\frac{4500\ kJ}{3600\ s} *(T_{house}-T_{out})}{4\ kW}$

Where T_{house} = 24°C and T_{out} is temperature outside

To achieve maximum heating, we will have to use the most efficient heat pump, and, according to the second law of thermodynamics, nothing is more efficient that Carnot Heat Pump

Which has COP of:

$COP_{carnot}=\frac{T_{house}}{T_{house}-T_{out}}$

So we equate the COP of our heater with COP of Carnot heater

$\frac{1.25 *(T_{house}-T_{out})}{4}=\frac{T_{house}}{T_{house}-T_{out}}$

Rearrange the equation

$\frac{1.25}{4}(24-T_{out})^2-24=0$

Solve this simple quadratic equation, and you should get that the lowest outdoor temperature that could still allow heat to be pumped into your house would be

15.24°C

4 0

3 years ago

An FPC 4 m2 in area is tested during the night to measure the overall heat loss coefficient. Water at 60 C circulates through th

sp2606 [1]

Answer:

<em> - 14.943 W/m^2K ( negative sign indicates cooling ) </em>

Explanation:

Given data:

Area of FPC = 4 m^2

temp of water = 60°C

flow rate = 0.06 l/s

ambient temperature = 8°C

exit temperature = 49°C

<u>Calculate the overall heat loss coefficient </u>

Note : heat lost by water = heat loss through convection

m*Cp*dT = h*A * ( T - To )

∴ dT / T - To = h*A / m*Cp ( integrate the relation )

In ( $\frac{49-8}{60-8}$ ) = h* 4 / ( 0.06 * 10^-3 * 1000 * 4180 )

In ( 41 / 52 ) = 0.0159*h

hence h = - 0.2376 / 0.0159

= - 14.943 W/m^2K ( heat loss coefficient )

7 0

3 years ago

Ages have been identified by the materials developed and used in those eras.

Westkost [7]

Ok what is the question

6 0

3 years ago

Read 2 more answers