Answer:
A) The process that give us day and night.
Explanation:
From the answer choices provided the one that is not an example of this is the process that give us day and night. This is because, the day/night cycle occurs as the Earth spins on it's axis. This cause one side of the Earth to be facing the Sun, which is the side that is currently experiencing day time while the other side is experiencing night time. As the Earth spins the cycles repeat. This is not an example of revolving.
Answer:
a) Batteries and fuel cells are examples of galvanic cell
b) Ag-cathode and Zn-anode
c) Cell notation: Zn(s)|Zn²⁺(aq) || Ag⁺(aq)|Ag(s)
Explanation:
a) A galvanic cell is an electrochemical cell in which chemical energy is converted to electrical energy. The chemical reaction which drives a galvanic cell is a redox reaction i.e. a reduction-oxidation process.
A typical galvanic cell is composed of two electrodes immersed in a suitable electrolyte and connected via a salt bridge. One of the electrodes serves as a cathode where reduction or gain of electrons takes place. The other half cell functions as an anode where oxidation or loss of electrons occurs. Batteries and fuel cells are examples of galvanic cells.
b) The nature of the electrode that will serve as an anode or cathode depends on the value of the standard reduction potential (E⁰) of that electrode. The electrode with a higher or more positive the value of E⁰ serves as the cathode and the other will function as an anode.
In the given case, the E⁰ values from the standard reduction potential table are:
E⁰(Zn/Zn2+) = -0.763 V
E°(Ag/Ag+)=+0.799 V
Therefore, Ag will be the cathode and Zn will be the anode
c) In the standard cell notation, the anode half cell is written on the left followed by the salt bridge '||' and finally the cathode half cell to the right.
Zn(s)|Zn²⁺(aq) || Ag⁺(aq)|Ag(s)
Answer:
if I aint wrong it would 2nd one
<em>Its B fam, hope you get that good grade.</em>
Answer: Tension = 47.8N, Δx = 11.5×
m.
Tension = 95.6N, Δx = 15.4×
m
Explanation: A speed of wave on a string under a tension force can be calculated as:

is tension force (N)
μ is linear density (kg/m)
Determining velocity:


0.0935 m/s
The displacement a pulse traveled in 1.23ms:


Δx = 11.5×
With tension of 47.8N, a pulse will travel Δx = 11.5×
m.
Doubling Tension:



|v| = 0.1252 m/s
Displacement for same time:


15.4×
With doubled tension, it travels
15.4×
m