Ask question

Ask question

All categories

3 years ago

6

Which of the following is most likely to happen when energy is transferred to an object A) the object will stay exactly the same

B)The object Will begin to move C)the force on the object will decrease D) the mass of the object will increase

1 answer:

omeli [17]3 years ago

6 0

Answer:

B. the object will begin to move

Explanation:

If energy is transferred the object will definitely change so it CANNOT be "A". If you add energy the object will have more force so it CANNOT be "C". The mass of an object can't increase just by giving an object energy so it CANNOT be "D"

You might be interested in

A bullet glider and a target glider both have a mass of 0.200 kg. The bullet glider is moving 0.450 m/s

Romashka [77]

Answer:

the two gliders collide, the mobile glider will transfer a bit of time to the fixed glider, which is why it comes out with a speed that is smaller than that of the bullet glider.

Explanation:

When the two gliders collide, the mobile glider will transfer a bit of time to the fixed glider, which is why it comes out with a speed that is smaller than that of the bullet glider.

Changes can occur that the gliders unite and move with a cosecant speed less than the initial one.

The whole process must be analyzed using conservation of the moment.

p₀ = m v₀

celestines que clash case

p_f = (m + M) v

po = pf

m v₀ = (n + M) v

v = $\frac{m}{m+M}$

calculemos

v= $\frac{0.200}{0.200+M} 0.450$

v= 0.09 m/s

elastic shock case

p₀ = m v₀

p_f = m v₁ +M v₂

p₀ = p_f

m v₀ = m v₁ + m v₂

6 0

3 years ago

Brandon buys a new Seadoo. He goes 22 km north from the beach. He then goes 11km to the east. Then chases a boat 3 km north. Wha

KIM [24]

Answer:

36kms

Explanation:

22+1=33

33+3=36

6 0

3 years ago

The drawing shows a hydraulic chamber with a spring (spring constant = 1600 N/m) attached to the input piston and a rock of mass

Triss [41]

Answer:

$\Delta x=245\ mm$

Explanation:

Given:

spring constant of the spring attached to the input piston, $k=1600\ N.m^{-1}$

mass subjected to the output plunger, $m=40\ kg$

<u>Now, the force due to the mass:</u>

$F=m.g$

$F=40\times 9.8$

$F=392\ N$

<u>Compression in Spring:</u>

$\Delta x=\frac{F}{k}$

$\Delta x=\frac{392}{1600}$

$\Delta x=0.245\ m$

or

$\Delta x=245\ mm$

8 0

4 years ago

A capacitor consists of two parallel plates, each with an area of 17.0 cm2 , separated by a distance of 0.150 cm . The material

Llana [10]

Answer:

a) $C = 40.138\,pF$ , b) $q = 16.056\,nC$ , c) $U = 3.212\,\mu J$

Explanation:

a) The capacitance of two parallel plates capacitor with dielectric is given by the following expression:

$C = K\cdot \epsilon_{o}\cdot \frac{A}{d}$

Where:

$K$ - Dielectric constant.

$\epsilon_{o}$ - Vaccum permitivity.

$A$ - Plate area.

$d$ - Distance between plates.

Hence, the capacitance of the system is:

$C = (4.00)\cdot (8.854\times 10^{-12}\,\frac{F}{m} )\cdot \left(\frac{17\times 10^{-4}\,m^{2}}{0.150\times 10^{-2}\,m}\right)$

$C = 4.014\cdot 10^{-11}\,F$

$C = 40.138\,pF$

b) The charge can be found by using the definition of capacitance:

$q = C\cdot V_{batt}$

$q = (4.014\times 10^{-11}\,F)\cdot (400\,V)$

$q = 1.606\times 10^{-8}\,C$

$q = 16.056\,nC$

c) The energy stored in the charged capacitor is:

$U=\frac{1}{2}\cdot Q\cdot V_{batt}$

$U=\frac{1}{2}\cdot (1.606\times 10^{-8}\,C)\cdot (400\,V)$

$U = 3.212\times 10^{-6}\,J$

$U = 3.212\,\mu J$

3 0

3 years ago

Read 2 more answers

if you push a small act with 7,000 N force and push a heavy truck with the same force, which one will have a greater acceleratio

inn [45]

Answer:

the small one will have greater acceleration

Explanation:

force and mass are inversely proportional. force and acceleration are directly proportional. which means greater mass have smaller acceleration and smaller mass has greater acceleration. this is due to newtons second law of motion.

6 0

3 years ago

Read 2 more answers