First, let us derive our working equation. We all know that pressure is the force exerted on an area of space. In equation, that would be: P = F/A. From Newton's Law of Second Motion, force is equal to the product of mass and gravity: F = mg. So, we can substitute F to the first equation so that it becomes, P = mg/A. Now, pressure can also be determined as the force exerted by a fluid on an area. This fluid can be measure in terms of volume. Relating volume and mass, we use the parameter of density: ρ = m/V. Simplifying further in terms of height, Volume is the product of the cross-sectional area and the height. So, V = A*h. The working equation will then be derived to be:
P = ρgh
This type of pressure is called the hydrostatic pressure, the pressure exerted by the fluid over a known height. Next, we find the literature data of the density of seawater. From studies, seawater has a density ranging from 1,020 to 1,030 kg/m³. Let's just use 1,020 kg/m³. Substituting the values and making sure that the units are consistent:
P = (1,020 kg/m³)(9.81 m/s²)(11 km)*(1,000 m/1km)
P = 110,068,200 Pa or 110.07 MPa
The correct answer is - c. escape.
The word ''escape'' means to get away from something. This word can be used for multiple different situations, and it can refer to both physical and psychological matters.
In a physical sense it can be used to escape from certain unpleasant, or dangerous situation. Example: I have to escape from this prison.
In a psychological sense it can be used to escape, move away, from a certain state of mind. Example: I have to find an escape from my depressive thoughts.
Conductor because it creates heat.
Answer:
The 2 light bulbs can be connected in parallel to each other to avoid disconnection when one bulb burns out.
Explanation:
The parallel connection is required not series. A parallel connection is the connection of electronic components (e.g bulbs, LED, resistors, capacitors etc) in such a way that the same voltage is supplied across the ends of the components. While in a series connection, the components are connected to each other end-to-end.
As regard the question, parallel connection ensures that the brightness any of the bulbs is not affected with respect to the other bulbs. And other bulbs continue to function when any burns out. The 2 light bulbs should be connected in parallel to the baterry to avoid disconnection of all the bulbs.
