Answer:
Explanation:
From the given information:
Let the weight of the mix in the air be =
Let the weight of the mix in water be = ; &
the bulk specific gravity be =
SO;
Also;
From (2), make the subject:
Now, equation (1) can be rewritten as:
Replacing the values;
Answer:
c. 25 μA
Explanation:
The dependent current source means that 31 times i1 will flow through the 6kΩ resistor, effectively increasing its voltage drop to 31 times that which would result from i1 alone. In effect, the 6kΩ resistor behaves in the left-side circuit loop as though it were 31×6kΩ = 186kΩ (with no dependent current source).
Then the current i1 is equivalent to that created by a 5+1 = 6V source through a 54kΩ +186kΩ = 240kΩ circuit impedance.
(6V)/(240kΩ) = 25 μA
_____
<em>Additional comment</em>
The voltage across the 6kΩ resistor is (186/240)·6V = 4.65V, and the 25 μA current generates a voltage of 30·(25 μA)(1.8kΩ) = 1.35V across the 1.8kΩ resistor. This means the voltage source at the right side of the diagram needs to be at least 4.65 +1.35 = 6.0V in order to support the calculated voltage drops.
Answer:
Evaporator,Compressor,Condensor ,Expanding valve
Explanation:
Split air conditioning :
Split air conditioning means that, condensor unit or some time called outdoor unit is split from evaporator.It means that evaporator and condensor are placed at some distance.
The four component of split air conditioning system are as follows
1.Evaporator
It absorb heat from room and produces the cooling effect.
2.Compressor
It compresses the refrigerant which exits from evaporator.
3.Condensor
It rejects the heat and cool the evaporator.
4.Expanding valve
It allows to refrigerant to cool up to evaporator pressure.
Answer:
honestly i don't know ok and you are pretty if that is you in the pfp
Explanation:
Answer: too small i can't read it
Explanation: