An engineer wants to design a knee replacement.Identify one criterion the design should meet.

Technician A says that in a circuit that has 3 Ohms of resistance and operates on 12 volts, the amperage must be 4 amps. Technic

Sveta_85 [38]

Answer:

Tech B

Explanation:

4 0

3 years ago

Define the Artist class in Artist.py with a constructor to initialize an artist's information. The constructor should by default

mina [271]

Answer:

Explanation:

As a result of the codes used to making this solved, i was unable to upload my answer, therefore i'm sending a screenshot of the codes.

thank you for your understanding,

cheers i hope this helps

6 0

4 years ago

Consider a simple ideal Rankine cycle with fixed boiler and condenser pressures. If the steam is superheated to a higher tempera

Usimov [2.4K]

Answer:

Option D - the moisture content at turbine exit will decrease

Explanation:

In an ideal rankine system, the phenomenon of superheating occurs at a state where the vapor state of the fluid is heated above its saturation temperature and the phase of the fluid is changed from the vapor phase to the gaseous phase.

Now, a vapour phase has two different substances at room temperature, whereas a gas phase consists of just a single substance at a defined thermodynamic range, at standard room temperature.

At the turbine exit, since it's just a single substance in gaseous phase, it means it will have less moisture content.

Thus, the correct answer is;the moisture content at turbine exit will decrease

4 0

3 years ago

Calculate the volume of a hydraulic accumulator capable of delivering 5 liters of oil between 180 and 80 bar, using as a preload

Vinil7 [7]

Answer:

1) $V_o = 10 liters$

2) $V_o = 12.26 liters$

Explanation:

For isothermal process n =1

$V_o =\frac{\Delta V}{(\frac{p_o}{p_1})^{1/n} -(\frac{p_o}{p_2})^{1/n}}$

$V_o = \frac{5}{[\frac{72}{80}]^{1/1} -[\frac{72}{180}]^{1/1}}$

$V_o = 10 liters$

calculate pressure ratio to determine correction factor

$\frac{p_2}{p_1} =\frac{180}{80} = 2.25$

correction factor for calculate dpressure ration for isothermal process is

c1 = 1.03

$actual \ volume = c1\times 10 = 10.3 liters$

b) for adiabatic process

n =1.4

volume of hydraulic accumulator is given as

$V_o =\frac{\Delta V}{[\frac{p_o}{p_1}]^{1/n} -[\frac{p_o}{p_2}]^{1/n}}$

$V_o = \frac{5}{[\frac{72}{80}]^{1/1.4} -[\frac{72}{180}]^{1/1.4}}$

$V_o = 12.26 liters$

calculate pressure ratio to determine correction factor

$\frac{p_2}{p_1} =\frac{180}{80} = 2.25$

correction factor for calculate dpressure ration for isothermal process is

c1 = 1.15

$actual \volume = c1\times 10 = 11.5 liters$

8 0

3 years ago

On Beverly's last project, the team identified only a few lessons learned. Which approach to lessons learned

Afina-wow [57]

Option C (making lessons learned a regular part of meetings) is the correct approach.

As nothing more than a general rule, typically construction companies only plan lessons that have been learned exercises or initiatives towards the end of a particular endeavor or segment.
As almost a result of the team knowing, valuable lessons are intended to increase the comprehensive implementation of quality management practices as well as deadlines.

Aside from this, none of the choices are viable methods to learning lessons or gaining knowledge from the past. As a result, the methodology outlined above is the appropriate one.

Learn more about project teamwork here:

brainly.com/question/14279121

7 0

3 years ago