Answer: C2HNO3
Explanation: C = 27.59/12.011 = 2.297
H = 1.15/1.008 = 1.1409
N = 16.09/14.007 = 1.1487
O = 55.17/15.999 = 3.4483
Divide by smallest result:
C = 2
H=1
N=1
O = 3
Empirical formula = C2HNO3
Answer:
The answer to your question would be "the insect touching the trigger hairs".
Explanation:
I'm not much of an ex-plainer but I know this is the right answer because I took the test and got a 100%. Please trust me on this. If wrong, please tell me. This is what I was taught at school. Thank you and good day.
Answer:
See detailed explanation.
Explanation:
Hello.
In this case, since each place has specific conditions of temperature, humidity, altitude and others, it is important for the companies building houses to consider all of those factors because they could wear out or affect the customer's lifestyle as the years go by.
More specifically, for temperature, since customers tend to complain and concern about it, there are some strategies in order to control it:
- In terms of location, it is possible to locate the house near to threes covering the sun, build it in a higher altitude since the higher altitude the lower the environmental temperature or just look for a place wherein the temperature is almost constant, for instance, south America.
- In terms of design, it is possible to build the walls and roofs with isolating materials which very likely to keep the inner part of the house from high temperatures or just installing heaters inside them.
Of course, there may be more strategies in order to control it.
Best regards.
Answer:
Close to the calculated endpoint of a titration - <u>Partially open</u>
At the beginning of a titration - <u>Completely open</u>
Filling the buret with titrant - <u>Completely closed</u>
Conditioning the buret with the titrant - <u>Completely closed</u>
Explanation:
'Titration' is depicted as the process under which the concentration of some substances in a solution is determined by adding measured amounts of some other substance until a rection is displayed to be complete.
As per the question, the stopcock would remain completely open when the process of titration starts. After the buret is successfully placed, the titrant is carefully put through the buret in the stopcock which is entirely closed. Thereafter, when the titrant and the buret are conditioned, the stopcock must remain closed for correct results. Then, when the process is near the estimated end-point and the solution begins to turn its color, the stopcock would be slightly open before the reading of the endpoint for adding the drops of titrant for final observation.
