All categories

3 years ago

Who is responsible for making sure that PPE fits each worker properly ?

Engineering

2 answers:

qwelly [4]3 years ago

7 0

Answer:

The Correct Answer is

A) employee

Explanation:

PPE exercised at a workplace must be:

PPE is gear carried to reduce danger to a kind of danger.
chosen to decrease danger to serve fitness and safety.
proper for the characteristics of the job and any danger connected with the profession.
a proper measurement and fit and understandably satisfactory for the personality consuming it.

Yanka [14]3 years ago

7 0

The employer so the answer is B

You might be interested in

Consider an aircraft powered by a turbojet engine that has a pressure ratio of 9. The aircraft is stationary on the ground, held

77julia77 [94]

Answer:

The break force that must be applied to hold the plane stationary is 12597.4 N

Explanation:

p₁ = p₂, T₁ = T₂

$\dfrac{T_{2}}{T_{1}} = \left (\dfrac{P_{2}}{P_{1}} \right )^{\frac{K-1}{k} }$

${T_{2}}{} = T_{1} \times \left (\dfrac{P_{2}}{P_{1}} \right )^{\frac{K-1}{k} } = 280.15 \times \left (9 \right )^{\frac{1.333-1}{1.333} } = 485.03\ K$

The heat supplied = $\dot {m}_f$ × Heating value of jet fuel

The heat supplied = 0.5 kg/s × 42,700 kJ/kg = 21,350 kJ/s

The heat supplied = $\dot m$ · $c_p(T_3 - T_2)$

$\dot m$ = 20 kg/s

The heat supplied = 20* $c_p(T_3 - T_2)$ = 21,350 kJ/s

$c_p$ = 1.15 kJ/kg

T₃ = 21,350/(1.15*20) + 485.03 = 1413.3 K

p₂ = p₁ × p₂/p₁ = 95×9 = 855 kPa

p₃ = p₂ = 855 kPa

T₃ - T₄ = T₂ - T₁ = 485.03 - 280.15 = 204.88 K

T₄ = 1413.3 - 204.88 = 1208.42 K

$\dfrac{T_5}{T_4} = \dfrac{2}{1.333 + 1}$

T₅ = 1208.42*(2/2.333) = 1035.94 K

$C_j = \sqrt{\gamma \times R \times T_5}$ = √(1.333*287.3*1035.94) = 629.87 m/s

The total thrust = $\dot m$ × $C_j$ = 20*629.87 = 12597.4 N

Therefore;

The break force that must be applied to hold the plane stationary = 12597.4 N.

5 0

2 years ago

Question #8

iris [78.8K]

Problem solving is the act of orderly searching for solutions to problem

The correct option that involves approaching a problem in a new way is the option;

Creative thinking

The reasons why creative thinking is the correct option is given as follows;

Finding new ways to approach a problem, involves considering alternatives to already known approaches to the problem

Given that the options to be considered are to be options which have not been applied, then the process does not involve;

Context: Which looks at the variables that relate the problem with setting or circumstance that aid understanding of the problem

Critical thinking; Which is based on the analysis of the known facts, but the new proposals are required

Perseverance; Which involves adherence to a particular option despite delay or difficulty

However;

Creative thinking; Creative thinking involves the consideration of a situation thing or problem in a new way or by approaching a task differently than what was considered a regular approach, which involves finding an unused or imaginative approach to a problem

Therefore;

The option that involves finding new ways to approach a problem is <u>creative thinking</u>

<u />

Learn lore about problem solving here:

brainly.com/question/24528689

3 0

1 year ago

The depletion in the Ozone layer is caused by:

andrew11 [14]

D. Chlorofluorocarbon

This is a man-made carbon that causes the gradual thinning(deception) in the earth’s Ozone layer.

Hope this helped and pls mark as brainliest!

~ Luna

3 0

2 years ago

Read 2 more answers

A rectangular steel bar, with 8" x 0.75" cross-sectional dimensions, has equal and opposite moments applied to its ends.

denpristay [2]

Answer:

Part a: The yield moment is 400 k.in.

Part b: The strain is $8.621 \times 10^{-4} in/in$

Part c: The plastic moment is 600 ksi.

Explanation:

Part a:

As per bending equation

$\frac{M}{I}=\frac{F}{y}$

Here

M is the moment which is to be calculated
I is the moment of inertia given as

$I=\frac{bd^3}{12}$

Here

b is the breath given as 0.75"
d is the depth which is given as 8"

$I=\frac{bd^3}{12}\\I=\frac{0.75\times 8^3}{12}\\I=32 in^4$

y is given as

$y=\frac{d}{2}\\y=\frac{8}{2}\\y=4"\\$

Force is 50 ksi

$\frac{M_y}{I}=\frac{F_y}{y}\\M_y=\frac{F_y}{y}{I}\\M_y=\frac{50}{4}{32}\\M_y=400 k. in$

The yield moment is 400 k.in.

Part b:

The strain is given as

$Strain=\frac{Stress}{Elastic Modulus}$

The stress at the station 2" down from the top is estimated by ratio of triangles as

$F_{2"}=\frac{F_y}{y}\times 2"\\F_{2"}=\frac{50 ksi}{4"}\times 2"\\F_{2"}=25 ksi$

Now the steel has the elastic modulus of E=29000 ksi

$Strain=\frac{Stress}{Elastic Modulus}\\Strain=\frac{F_{2"}}{E}\\Strain=\frac{25}{29000}\\Strain=8.621 \times 10^{-4} in/in$

So the strain is $8.621 \times 10^{-4} in/in$

Part c:

For a rectangular shape the shape factor is given as 1.5.

Now the plastic moment is given as

$shape\, factor=\frac{Plastic\, Moment}{Yield\, Moment}\\{Plastic\, Moment}=shape\, factor\times {Yield\, Moment}\\{Plastic\, Moment}=1.5\times400 ksi\\{Plastic\, Moment}=600 ksi$

The plastic moment is 600 ksi.

3 0

3 years ago

An inventor claims to have developed a refrigerator that at steady state requires a net power input of 1.1 horsepower to remove

Lynna [10]

Answer:

The inventor's claim is false in the sense that no thermal machine can violate the first thermodynamic law.

Explanation:

The inventor's claim could not be possible as no thermal machine can transfer more heat than the input work consumed. If we expose the thermal efficiency:

$n=Q out / W in$

Where Q and W both must be in the same power unit, so we will convert the remove heat from BTU/hr to hp:

$12000 BTU/hr = 4.72 hp$

Therefore by comparing, we notice that the removing heat of 4.75 hp is large than the delivered work of 1.11 hp. By evaluating the efficiency:

[tex]n=4.75 hp / 1.1 hp = 4.3 > 1[/tex]

6 0

2 years ago