Answer:
<h3>The answer is 20 N</h3>
Explanation:
The force acting on an object given it's mass and acceleration can be found by using the formula
<h3>Force = mass × acceleration</h3>
From the question
mass = 10 kg
acceleration = 2 m/s²
We have
Force = 10 × 2
We have the final answer as
<h3>20 N</h3>
Hope this helps you
A
point source is to be used with a concave mirror to produce a beam of
parallel light. The source should be placed midway between the center
of curvature and the mirror. To solve this question you have to draw
a ray diagram. Apply the mirror equation to determine the image
distance and finally make sure that the first two steps are
consistent with each other.
<span>I
hope this helps, Regards.</span>
<h2>
The child swing through the swing's equilibrium position 6 times during the course of 3 periods.</h2>
Explanation:
One period means time taken to complete one revolution.
In case of swings in one period time it travels the same position through two times.
Here we need to find how many times does the child swing through the swing's equilibrium position during the course of 3 period(s) of motion.
For 1 period = 2 times
For 3 periods = 3 x For 1 period
For 3 periods = 3 x 2 times
For 3 periods = 6 times
The child swing through the swing's equilibrium position 6 times during the course of 3 periods.
Answer:
160.75 N
Explanation:
The downward velocity has no effect on the force situation, it is only changes in velocity (plus, of course, gravity, which is always there) that require a force. At constant velocity, the bottom spring s_3 is supporting its mass m_3 to balance gravity.
As the elevator slows, though, it also ends up slowing down the spring arrangement, too. However, because the stretching takes time, it means that some damped harmonic motion will be set up in the spring chain.
When the motion has finally damped out, the net force the bottom spring s3 exerts on m3 has two components--that of gravity and of the deceleration of the elevator:
F_3net = m3 * (g + a) = 10.5×(9.81+5.5)= 10.5×15.31= 160.75 N
Answer:
Systematic errors.
Explanation:
The density of the aluminium was calculated by a human and this is not natural but can be due to errors in the calibration of the scale for measuring the weight or taking readings from the measuring cylinder.
Random errors are natural errors. Random errors in experimental measurements are caused by unknown and unpredictable changes in the experiment. Systematic errors are due to imprecision or problems with instruments.
