Answer:
yes it is possible
Explanation:
dislocation are if two type edge and screw dislocations
edge dislocation is a defect where an extra half plane is inside the lattice.
and screw dislocation is one in which can be assumed as the first half of the crystal slips over another.
These dislocation can coexist together where the line direction and burger vectors are neither parallel nor perpendicular then at that condition both dislocation screw and edge will coexist
Answer:
hello some parts of your question is missing attached below is the missing part ( the required fig and table )
answer : The solar collector surface area = 7133 m^2
Explanation:
Given data :
Rate of energy input to the collectors from solar radiation = 0.3 kW/m^2
percentage of solar power absorbed by refrigerant = 60%
Determine the solar collector surface area
The solar collector surface area = 7133 m^2
attached below is a detailed solution of the problem
Answer:
The velocity of flow is 10.0 m/s.
Explanation:
We shall use Manning's equation to calculate the velocity of flow
Velocity of flow by manning's equation is given by

where
n = manning's roughness coefficient
R = hydraulic radius
S = bed slope of the channel
We know that for an asphalt channel value of manning's roughness coefficient = 0.016
Applying values in the above equation we obtain velocity of flow as

Answer:
C
Explanation:
Pitot tube:
Pitot tube is a device which is used to measure the velocity of flow by measuring pressure difference between the points.
As we know that stagnation pressure is the summation of dynamic and static pressure.
Stagnation pressure = Static pressure + Dynamic pressure
So
Dynamic pressure = Stagnation pressure - Static pressure
We know that dynamic pressure

On the other hand Pitot tube measure the dynamic pressure.
So option C is correct.