What is the area of the triangle?v

One type of illumination system consists of rows of strip fluorescents and a ceiling that will transmit light. For this system t

marshall27 [118]

Answer:

For this system to be efficient, the surfaces above the luminous ceiling must be white, so that all the light been transmitted is reflected.

Explanation:

White surfaces reflect light at almost 100% efficiency, this ensures that non of the light been transmitted is absorbed.

Thus, if one type of illumination system consists of rows of strip fluorescents and a ceiling that will transmit light. For this system to be efficient, the surfaces above the luminous ceiling must be white so that all the light been transmitted is reflected.

3 0

3 years ago

A food department is kept at -12 °C by a refrigerator in an environment at 30 °C. The total heat gain to the food department is

Nataly [62]

Answer: P = 0.416 kW

Explanation:

taken a step by step process to solving this problem.

we have that from the question;

the amount of heat rejected Qn = 4800 kJ/h

the cooling effect is Ql = 3300 kJ/h

Applying the first law of thermodynamics for this system gives us

Шnet = Qn -Ql

Шnet = 4800 - 3300 = 1500 kJ/h

Next we would calculate the coefficient of performance of the refrigerator;

COPr = Desired Effect / work output = Ql / Шnet = 3300/1500 = 2.2

COPr = 2.2

The Power as required gives;

P = Qn - Ql = 4800 - 3300 = 1500 kJ/h = 0.416

P = 0.416 kW

cheers i hope this helps!!!!1

5 0

4 years ago

The difference in quantity between the add and full marks on an engine oil dipstick is typically

svetoff [14.1K]

Answer:

1 quart (0.9 liters).

Explanation:

A proper inspection of various systems and components in a vehicle at regular intervals is very important and necessary because it helps to ensure that the vehicle is in a safe and reliable condition.

Generally, these inspection includes tyres, lighting systems, fan belts, shock absorbers, fluid (oil and water) level, etc. If any fault or concern is detected in the course of an inspection, it should be noted for quick repair or servicing by an expert technician.

All automobile engine requires an adequate amount of engine oil as a lubricant so as to mitigate friction and enhance proper functionality of the vehicle. Thus, the proper functionality of an engine is largely dependent on the level of the engine oil; it shouldn't be too low or high.

Basically, the engine oil should be checked at regular intervals (periodically) and should be on the level indicated or chosen by the manufacturer of the vehicle.

A dipstick is designed to be used for checking the engine oil level in a vehicle and it is marked with lines indicating minimum and maximum, low and high or add and full.

The difference in quantity between the add and full marks on an engine oil dipstick is typically 1 quart (0.9 liters).

5 0

2 years ago

Write a program to calculate overtime pay of 10 employees. Overtime is paid at the rate of Rs. 12.00

fgiga [73]

Answer:

Here is the code.

Explanation:

#include<stdio.h>

int main()

{

int i, time_worked, over_time, overtime_pay = 0;

for (i = 1; i <= 10; i++)

{

printf("\nEnter the time employee worked in hr ");

scanf("%d", &time_worked);

if (time_worked>40)

{

over_time = time_worked - 40;

overtime_pay = overtime_pay + (12 * over_time);

}

printf("\nTotal Overtime Pay Of 10 Employees Is %d", overtime_pay);

return 0;

}

Output :

Enter the time employee worked in hr 42

Enter the time employee worked in hr 45

Enter the time employee worked in hr 42

Enter the time employee worked in hr 41

Enter the time employee worked in hr 50

Enter the time employee worked in hr 51

Enter the time employee worked in hr 52

Enter the time employee worked in hr 53

Enter the time employee worked in hr 54

Enter the time employee worked in hr 55

Total Overtime Pay Of 10 Employees Is 1020.

6 0

2 years ago

A pitfall cited in Section 1.10 is expecting to improve the overall performance of a computer by improving only one aspect of th

Oxana [17]

Answer:

a) For this case the new time to run the FP operation would be reduced 20% so that means 100-20% =80% from the original time

$(1-0.2)*70 s =56s$

The reduction on this case is $70-56 s=14s$

And since the new total time would be given by $250-14=236 s$

b) For this case the total time is reduced 20% so that means that the new total time would be (1-0.2)=0.8 times the original total time $(1-0.2) *250s =200 s$

The original time for INT operations is calculated as:

$250 = 70+85+40 +t_{INT}$

$t_{INT}=55s$

For this part the only time that was changed is assumed the INT operations so then:

$200 = 70+85+40 \Delta t_{INT}$

And then: $\Delta t_{INT}= 200-70-85-40=5 s$

c) A reduction of the total time implies that the total time would be 205 s from the results above. And the time for FP is 70, for L/S is 85 and for INT operations is 55 s, so then if we add 70+85+55=210s, we see that 210>205 so then we cannot reduce the total time 20% just reducing the branch intructions.

Explanation:

From the info given we know that a computer running a program that requires 250 s, with 70 s spent executing FP instructions, 85 s executed L/S instructions and 40 s spent executing branch instructions.

Part 1

For this case the new time to run the FP operation would be reduced 20% so that means 100-20% =80% from the original time

$(1-0.2)*70 s =56s$

The reduction on this case is $70-56 s=14s$

And since the new total time would be given by $250-14=236 s$

Part 2

For this case the total time is reduced 20% so that means that the new total time would be (1-0.2)=0.8 times the original total time $(1-0.2) *250s =200 s$

The original time for INT operations is calculated as:

$250 = 70+85+40 +t_{INT}$

$t_{INT}=55s$

For this part the only time that was changed is assumed the INT operations so then:

$200 = 70+85+40 \Delta t_{INT}$

And then: $\Delta t_{INT}= 200-70-85-40=5 s$

And we can quantify the decrease using the relative change:

$\% Change = \frac{5s}{55 s} *100 = 9.09\%$ of reduction

Part 3

A reduction of the total time implies that the total time would be 205 s from the results above. And the time for FP is 70, for L/S is 85 and for INT operations is 55 s, so then if we add 70+85+55=210s, we see that 210>205 so then we cannot reduce the total time 20% just reducing the branch intructions.

8 0

3 years ago