Aplicación al multivibrador monoestable

Who here likes to play project gotham racing?<br> will mark brainlyest

irinina [24]

Answer:

me

Explanation:

8 0

3 years ago

Read 2 more answers

Sea water with a density of 1025 kg/m3 flows steadily through a pump at 0.21 m3 /s. The pump inlet is 0.25 m in diameter. At the

myrzilka [38]

Answer:

$\dot W_{pump} = 16264.922\,W\,(16.265\,kW)$

Explanation:

The pump is modelled after applying Principle of Energy Conservation, whose form is:

$\frac{P_{1}}{\rho\cdot g}+ \frac{v_{1}^{2}}{2\cdot g} +z_{1} + h_{pump}=\frac{P_{2}}{\rho\cdot g}+ \frac{v_{2}^{2}}{2\cdot g} +z_{2}$

The head associated with the pump is cleared:

$h_{pump} = \frac{P_{2}-P_{1}}{\rho\cdot g}+\frac{v_{2}^{2}-v_{1}^{2}}{2\cdot g}+(z_{2}-z_{1})$

Inlet and outlet velocities are found:

$v_{1} = \frac{0.21\,\frac{m^{3}}{s} }{\frac{\pi}{4}\cdot (0.25\,m)^{2} }$

$v_{1} \approx 4.278\,\frac{m}{s}$

$v_{2} = \frac{0.21\,\frac{m^{3}}{s} }{\frac{\pi}{4}\cdot (0.152\,m)^{2} }$

$v_{2} \approx 11.573\,\frac{m}{s}$

Now, the head associated with the pump is finally computed:

$h_{pump} = \frac{175\,kPa-81.326\,kPa}{(1025\,\frac{kg}{m^{3}} )\cdot (9.807\,\frac{m}{s^{2}} )} +\frac{(11.573\,\frac{m}{s} )^{2}-(4.278\,\frac{m}{s} )^{2}}{2\cdot (9.807\,\frac{m}{s^{2}} )} + 1.8\,m$

$h_{pump} = 7.705\,m$

The power that pump adds to the fluid is:

$\dot W_{pump} = \dot V \cdot \rho \cdot g \cdot h_{pump}$

$\dot W_{pump} = (0.21\,m^{3})\cdot (1025\,\frac{kg}{m^{3}})\cdot (9.807\,\frac{m}{s^{2}})\cdot(7.705\,m)$

$\dot W_{pump} = 16264.922\,W\,(16.265\,kW)$

4 0

3 years ago

What is civil engineering

kkurt [141]

Answer:

engineering that works on building structures.

Explanation:

7 0

4 years ago

"How would you direct traffic in the result of a catastrophic earthquake?"

11Alexandr11 [23.1K]

Answer:

In the result of a earthquake, you should direct people into areas that are safe, such as places where the ground has not been broken up, and then tell people to get out of their cars and be careful. You should also have them carry any valuable items out of the car(if they have time), and then wait until the initial shocks and aftershocks are over, and then tell them to get back into their cars and then drive carefully and safely.

8 0

3 years ago

Read 2 more answers

Steam heated at constant pressure in a steam generator enters the first stage of a supercritical reheat cycle at 28 MPa, 5208C.

algol [13]

This question is incomplete, the complete question is;

Steam heated at constant pressure in a steam generator enters the first stage of a supercritical reheat cycle at 28 MPa, 520°C. Steam exiting the first-stage turbine at 6 MPa is reheated at constant pressure to 500°C. Each turbine stage has an isentropic efficiency of 78% while the pump has an isentropic efficiency of 82%. Saturated liquid exits the condenser that operates at constant pressure of 6 kPa.

Determine the quality of the steam exiting the second stage of the turbine and the thermal efficiency.

Answer:

- the quality of the steam exiting the second stage of the turbine is 0.9329

- the thermal efficiency is 36.05%

Explanation:

get the properties of steam at pressure p1 = 28 MPa and temperature T2 = 520°C .

Specific enthalpy h1= 3192.3 kJ/kg

Specific entropy s1 = 5.9566 kJ/kg.K

Process 1 to 2s is isentropic expansion process in the turbine

S1 = S2s

get the enthalpy at state 2s at pressure p2 = 6 MPa and S2s = 5.9566 kJ/kg.K

h2s = 2822.2 kJ/kg

get the enthalpy at state 2 using isentropic turbine efficiency of the turbine. nT1 = (h1 - h2) / (h1 - h2s)

0.78 = (3192.3 - h2) / (3192.3 - 2822.2)

h2 = 2903.6 kJ/kg

get the enthalpy at state 3 at pressure p2 = p3 = 6 MPa and T3 = 500°C

h3 = 3422.2 kJ/kg

s3 = 6.8803 kJ/kg.K

Process 3 to 4s is isentropic expansion process in the turbine

S3 = S4s

get the enthalpy at state 4s at pressure p4s = p4 = 6 kPa and S4s = 6.8803 kJ/kg.K

h4s = 2118.8 kJ/kg

get the enthalpy at state 4 using isentropic turbine efficiency of the turbine. nT2 = (h3 - h4) / (h3 - h4s)

0.78 = (3422.2 - h4) / ( 3422.2 - 2118.8 )

h4 = 2405.5 kJ/kg

get the properties at pressure, p5 = 6 kPa

h5 = hf

= 151.53 kJ/kg

v5 = Vf

= 0.0010064 m³/kg

get the enthalpy at state 6 using isentropic pump efficiency of the turbine, at

p6 = p1 = 28 MPa

np = v5( p6 - p5) / (h6 - h5)

0.82 = ((0.0010064)( 28000 - 6)) / (h6 - 151.53)

h6 = 185.89 kJ/kg

Now to find the quality of the steam at the exit of the second stage of the turbine

At stat4, p4 = 6kPa

h4f = 151.53 kJ/kg

h4fg = 2415.9 kJ/kg

h4 = h4f + x4h4fg

2405.5 = 151.53 + (x4 (2415.9))

x4 = 0.9329

the quality of the steam exiting the second stage of the turbine is 0.9329

Also to find the efficiency of the power plant, we use the following equation;

n = Wnet / Qin

= (Wt1 + Wt2 - Wp) / (Q61 + Q23)

= [(h1 - h2) + (h3 - h4) - (h6 - h5)] / [(h1 - h6) + (h3 - h2)]

[(3192.3 - 2903.6) + (3422.2 - 2405.5) - (185.89 - 151.53)] / [(3192.3 - 185.89) + (3422.2 - 2903.6)]

= 0.3605

n = 36.05%

therefore the thermal efficiency is 36.05%

3 0

3 years ago