All categories

2 years ago

Please help!! I will award 25 points!!

Physics

1 answer:

USPshnik [31]2 years ago

8 0

Answer: 115m. Displacement can be taken from the distance between the initial point and the final point. In this case,the displacement is 115m.

You might be interested in

The tongue weight of a trailer should be what percent of the gross trailer weight rating

mario62 [17]

Answer:

between 10 and 15 percent

Explanation:

How to put your load

- First load the heavy

The safe trailer starts loading correctly. Uneven weight can affect steering, brakes and swing control.

In general, 60% of the weight of the load should be in the front half of the trailer and 40% in the rear half (unless the manufacturer indicates something different). When you place the load, you want it to be balanced from side to side, keeping the center of gravity near the ground and on the axle of the trailer.

- Hold your load

After balancing the load, you must hold it in place. An untapped load can move when the vehicle is moving and cause trailer instability.

- Trailer weight

To avoid overloading the trailer, look for the recommended weight rating. It is located on the VIN plate in the trailer chassis, usually on the tongue. Confirm the Gross Vehicle Weight Classification (GVWR) before towing.

GVWR: is the total weight that the trailer can support, including its weight. You can also find this number as the Gross Trailer Weight (GTW). The weight of the tongue should be 10-15% of the GTW.

7 0

2 years ago

Two round concentric metal wires lie on a tabletop, one inside the other. The inner wire has a diameter of 21.0 cm and carries a

Burka [1]

Solution :

a). B at the center :

$=\frac{u\times I}{2R}$

Here, one of the current is in the clockwise direction and therefore, the other current must be in the clockwise direction in order to cancel out the effect of the magnetic field that is produced by the other.

Therefore, the answer is ANTICLOCKWISE or COUNTERCLOCKWISE

b). Also, the sum of the fields must be zero.

Therefore,

$\left(\frac{u\times I_1}{2R_1}\right) + \left(\frac{u\times I_2}{2R_2}\right) = 0$

So,

$\frac{I_1}{d_1}= \frac{I_2}{d_2}$

$=\frac{16}{21}=\frac{I_2}{32}$

$I_2=24.38$ A

Therefore, the current in the outer wire is 24.38 ampere.

3 0

2 years ago

Read 2 more answers

Kyle is flying a helicopter at 125 m/s on a heading of 325 o . If a wind is blowing at 25 m/s toward a direction of 240.0 o , wh

frosja888 [35]

Answer:

The resultant velocity of the helicopter is $\vec v_{H} = \left(89.894\,\frac{m}{s}, -93.348\,\frac{m}{s}\right)$ .

Explanation:

Physically speaking, the resulting velocity of the helicopter ( $\vec v_{H}$ ), measured in meters per second, is equal to the absolute velocity of the wind ( $\vec v_{W}$ ), measured in meters per second, plus the velocity of the helicopter relative to wind ( $\vec v_{H/W}$ ), also call velocity at still air, measured in meters per second. That is:

$\vec v_{H} = \vec v_{W}+\vec v_{H/W}$ (1)

In addition, vectors in rectangular form are defined by the following expression:

$\vec v = \|\vec v\| \cdot (\cos \alpha, \sin \alpha)$ (2)

Where:

$\|\vec v\|$ - Magnitude, measured in meters per second.

$\alpha$ - Direction angle, measured in sexagesimal degrees.

Then, (1) is expanded by applying (2):

$\vec v_{H} = \|\vec v_{W}\| \cdot (\cos \alpha_{W},\sin \alpha_{W}) +\|\vec v_{H/W}\| \cdot (\cos \alpha_{H/W},\sin \alpha_{H/W})$ (3)

$\vec v_{H} = \left(\|\vec v_{W}\|\cdot \cos \alpha_{W}+\|\vec v_{H/W}\|\cdot \cos \alpha_{H/W}, \|\vec v_{W}\|\cdot \sin \alpha_{W}+\|\vec v_{H/W}\|\cdot \sin \alpha_{H/W} \right)$

If we know that $\|\vec v_{W}\| = 25\,\frac{m}{s}$ , $\|\vec v_{H/W}\| = 125\,\frac{m}{s}$ , $\alpha_{W} = 240^{\circ}$ and $\alpha_{H/W} = 325^{\circ}$ , then the resulting velocity of the helicopter is:

$\vec v_{H} = \left(\left(25\,\frac{m}{s} \right)\cdot \cos 240^{\circ}+\left(125\,\frac{m}{s} \right)\cdot \cos 325^{\circ}, \left(25\,\frac{m}{s} \right)\cdot \sin 240^{\circ}+\left(125\,\frac{m}{s} \right)\cdot \sin 325^{\circ}\right)$ $\vec v_{H} = \left(89.894\,\frac{m}{s}, -93.348\,\frac{m}{s}\right)$