Explanation:
the correct answer is the last one
Answer:
a) Q1= Q2= 11.75×10^-6Coulombs
b) Q1 =15×10^-6coulombs
Q2 = 38.75×10^-6coulombs
Explanation:
a) For a series connected capacitors C1 and C2, their equivalent capacitance C is expressed as
1/Ct = 1/C1 + 1/C2
Given C1 = 3.00 μF C2 = 7.75μF
1/Ct = 1/3+1/7.73
1/Ct = 0.333+ 0.129
1/Ct = 0.462
Ct = 1/0.462
Ct = 2.35μF
V = 5.00Volts
To calculate the charge on each each capacitors, we use the formula Q = CtV where Cf is the total equivalent capacitance
Q = 2.35×10^-6× 5
Q = 11.75×10^-6Coulombs
Since same charge flows through a series connected capacitors, therefore Q1= Q2=
11.75×10^-6Coulombs
b) If the capacitors are connected in parallel, their equivalent capacitance will be C = C1+C2
C = 3.00 μF + 7.75 μF
C = 10.75 μF
For 3.00 μF capacitance, the charge on it will be Q1 = C1V
Q1 = 3×10^-6 × 5
Q1 =15×10^-6coulombs
For 7.75 μF capacitance, the charge on it will be Q2 = 7.75×10^-6×5
Q2 = 38.75×10^-6coulombs
Note that for a parallel connected capacitors, same voltage flows through them but different charge, hence the need to use the same value of the voltage for both capacitors.
That taxi will traveled 1500s by carrying the passenger.
Accuracy describes how close a measurement is to the truest value while precision shows how close the measurements are to one another when repeated analysis of the same measurements are performed. Precision most likely is free from any any variation.
Answer:
This depends on what angle they are approaching each other before they collided.The two simple cases are if they are running in the same direction or opposite direction from each other. For either case, use the conservation of momentum equation to solve: M_total*V_result = M1*V1 + M2*V2
Explanation:
Here are two possible solutions.
Head-on collision: M1=78, V1=8.5, M2=72, V2=-7.5 (that's negative because he's running the other way), M_total = 78+72 = 150, so V_result = (78*8.5 - 72*7.5)/150 = 0.82 m/s. Sanity check, they weigh about the same and so most of their velocity should cancel out.
Running the same way: change the sign of V2 to positive so V_result = (78*8.5 + 72*7.5)/150 = 8.02 m/s. Sanity check, they weigh about the same and the resultant speed is between the two starting velocities.
<em>hope it helps:)</em>
