All categories

3 years ago

Es la perturbación de energía que se propaga a través de un medio

1 answer:

4 0

Answer: Una onda es una perturbación que se propaga en el espacio, transportando energía pero no materia. Cuando la perturbación se propaga a través de un medio material, se denomina onda mecánica, por ejemplo las ondas generadas en la cuerda de una guitarra o sobre la superficie de un lago.

Explanation:

You might be interested in

In which of these scenarios would the sound of a drumstick hitting a metal bar get to you in the least amount of time?explain ur

MA_775_DIABLO [31]

Answer:

Scenario 1 is the correct answer.

Explanation:

The sound of the drumstick hitting the metal bar will get to me in a shorter amount of time in Scenario 1 . The sound wave will travel faster in the metal bar than through the air because the speed of sound waves in solid is faster than it is in gases.

6 0

2 years ago

Read 2 more answers

Which statement best describes electrons?

crimeas [40]

They are positive and remain inside the nucleus.

4 0

2 years ago

PLEASE HELP!

Kobotan [32]

Answer:

Explanation:

Cause a monster truck don

3 0

2 years ago

Water (density = 1x10^3 kg/m^3) flows at 15.5 m/s through a pipe with radius 0.040 m. The pipe goes up to the second floor of th

RUDIKE [14]

Answer:

The speed of the water flow in the pipe on the second floor is approximately 13.1 meters per second.

Explanation:

By assuming that fluid is incompressible and there are no heat and work interaction through the line of current corresponding to the pipe, we can calculate the speed of the water floor in the pipe on the second floor by Bernoulli's Principle, whose model is:

$P_{1} + \frac{\rho\cdot v_{1}^{2}}{2}+\rho\cdot g\cdot z_{1} = P_{2} + \frac{\rho\cdot v_{2}^{2}}{2}+\rho\cdot g\cdot z_{2}$ (1)

Where:

$P_{1}$ , $P_{2}$ - Pressures of the water on the first and second floors, measured in pascals.

$\rho$ - Density of water, measured in kilograms per cubic meter.

$v_{1}$ , $v_{2}$ - Speed of the water on the first and second floors, measured in meters per second.

$z_{1}$ , $z_{2}$ - Heights of the water on the first and second floors, measured in meters.

Now we clear the final speed of the water flow:

$\frac{\rho\cdot v_{2}^{2}}{2} = P_{1}-P_{2}+\rho \cdot \left[\frac{v_{1}^{2}}{2}+g\cdot (z_{1}-z_{2}) \right]$

$\rho\cdot v_{2}^{2} = 2\cdot (P_{1}-P_{2})+\rho\cdot [v_{1}^{2}+2\cdot g\cdot (z_{1}-z_{2})]$

$v_{2}^{2}= \frac{2\cdot (P_{1}-P_{2})}{\rho}+v_{1}^{2}+2\cdot g\cdot (z_{1}-z_{2})$

$v_{2} = \sqrt{\frac{2\cdot (P_{1}-P_{2})}{\rho}+v_{1}^{2}+2\cdot g\cdot (z_{1}-z_{2}) }$ (2)

If we know that $P_{1}-P_{2} = 0\,Pa$ , $\rho=1000\,\frac{kg}{m^{3}}$ , $v_{1} = 15.5\,\frac{m}{s}$ , $g = 9.807\,\frac{m}{s^{2}}$ and $z_{1}-z_{2} = -3.5\,m$ , then the speed of the water flow in the pipe on the second floor is:

$v_{2}=\sqrt{\left(15.5\,\frac{m}{s} \right)^{2}+2\cdot \left(9.807\,\frac{m}{s^{2}} \right)\cdot (-3.5\,m)}$

$v_{2} \approx 13.100\,\frac{m}{s}$

The speed of the water flow in the pipe on the second floor is approximately 13.1 meters per second.

4 0

2 years ago

Frictional force is caused by the interaction of a body with

zheka24 [161]

Answer:

Frictional force always acts parallel to two planes in contact with each other and in a direction opposite to that of relative motion of the two bodies. 2. Frictional forces are caused due to intermolecular interactions between the bodies. Frictional force is more for rough surface and less for smooth surfaces.

6 0

3 years ago

Read 2 more answers