he following would be the correct method to check the load bearing joint is Raise the vehicle by the subframe and turn the steering wheel and listen for a popping noise.
Explanation:
- Ball joints on a vehicle equipped with MacPherson struts are being inspected for wear. It can be checked by raising the vehicle by the subframe and turn the steering wheel and listen for a popping noise.
- When a joint of CV becomes rusted or damaged, the flexibility of axle becomes out of order and starts making a constant clicking noise whenever the wheels are turned around.
- The struts are the most important part of the suspension system.
- The metallic clunking noise is found to be one of the most noticeable and frequent symptoms that shows of a bad ball joint which gives a bad clunking or knocking noise whenever the suspension operates in an up and down motion.
- The ball joint can be broken in the following ways:
- the ball detaching from the socket and stud breakage, nonetheless of the type of breakage, but it is catastrophic.
- When the joint of the ball completely breaks down, the wheel becomes free to move in all the directions.
Answer: the surface shear stress at x =1m from the leading edge of the plate is 4.1973 N/m²
Explanation:
Given that;
density s = 1.16 kg/m³
velocity = u = 50 m/s
kinetic viscosity r = 15.89 × 10⁻⁶ m²/s
xL = 1m from the leading edge of the plate
Now Reynold number (Rex)
Rex = UxL / r
Rex = (50 m/s × 1m ) / 15.89 × 10⁻⁶ m²/s
Rex = 3146633.1025
since Rex is greater than 5×10⁵ { Turbulent flow }
so Local skin friction coefficient
⇒ Cfx = 0.0577 / (Rex)^1/5
Cfx = 0.0577 / (3146633.1025)^1/5
Cfx = 0.0028947
Now Shear stress (y)
y = Cfx × 1/2 × su²
y = 0.0028947 × 1/2 × 1.16 × (50)²
y = 4.1973 N/m²
∴ the surface shear stress at x =1m from the leading edge of the plate is 4.1973 N/m²
Answer:
Explanation:
Ringelmann Effect can be described as the phenomena in which the performance of the individual member of the team declines on increasing the size of the team or group.
On research of the Ringelmann Effect, it was found that on increasing the size of the team or the group the performance improved whereas the inclusion of an additional member resulted in diminishing effect on the productivity.
The Ringelmann Effect concluded that the overall productivity of the group with more members will be more but the individual productivity of that group will be less.
In modern day understanding of the team dynamics, the firm should be able to identify the size of the team or group in order to fulfill their work objective thus avoiding the Ringelmann Effect.
The time management in small groups is more precise and hence the barrier in communication is also lesser.
B) feeder cables that is your answer