Answer:
(iv) second law of thermodynamics
Explanation:
The Clausius inequality expresses the second law of thermodynamics it applies to the real engine cycle.It is defined as the cycle integral of change in entropy of a reversible system is zero. It is nothing but mathematical form of second law of thermodynamics . It also states that for irreversible process the cyclic integral of change in entropy is less than zero
Answer:
laminar flow
Explanation:
In fluid dynamics, laminar flow is characterized by fluid particles following smooth paths in layers, with each layer moving smoothly past the adjacent layers with little or no mixing.
if two 1.5 ya alt batteries are connected to head to the tail the voltage is 3.0 volt it is the because the battery is insidious reduce a voltage equal to number of battery is multiplied by the voltage of individual
Answer:
i don't know if this help tell me if i am wrong
Explanation:
Gravity is the force that pulls all elements of matter together. Matter refers to things you can physically touch. The more matter there is, the greater the amount of gravity or force. This means that the Earth or other planets have a great deal of pull and that everything on Earth is pulled back to Earth.
Some examples of the force of gravity include:
The force that holds the gases in the sun.
The force that causes a ball you throw in the air to come down again.
The force that causes a car to coast downhill even when you aren't stepping on the gas.
The force that causes a glass you drop to fall to the floor.
Answer:
5.6 mm
Explanation:
Given that:
A cylindrical tank is required to contain a:
Gage Pressure P = 560 kPa
Allowable normal stress 
= 150 MPa = 150000 Kpa.
The inner diameter of the tank = 3 m
In a closed cylinder there exist both the circumferential stress and the longitudinal stress.
Circumferential stress 
Making thickness t the subject; we have
t = 0.0056 m
t = 5.6 mm
For longitudinal stress.
t = 0.0028 mm
t = 2.8 mm
From the above circumferential stress and longitudinal stress; the stress with the higher value will be considered ; which is circumferential stress and it's minimum value with the maximum thickness = 5.6 mm
