2 years ago

What would be the best bridge for this location and why?

Engineering

1 answer:

katrin [286]2 years ago

8 0

Your answer will be suspension bridges

You might be interested in

Consider a simply supported rectangular beam with a span length of 10 ft, a width of 8 in, and an effective depth of 20 in. Norm

yulyashka [42]

Answer:

beam with a span length of 10 ft, a width of 8 in, and an effective depth of 20 in. Normal weight concrete is used for the beam. This beam carries a total factored load of 9.4 kips. The beam is reinforced with tensile steel, which continues uninterrupted into the support. The concrete has a strength of 4000 psi, and the yield strength of the steel is 60,000 psi. Using No. 3 bars and 60,000 psi steel for stirrups, do the followings:

8 0

2 years ago

Find the current Lx in the figure

AleksandrR [38]

Explanation:

$\frac{1}{8} + \frac{1}{2} \\ 1.6 + 1.4 = 3 \\ \frac{1}{3} + \frac{1}{9} \\ 2.25 + 2 = 4.25 \: ohm$

R total = 4.25 ohm

I total = Vt/Rt

I total= 17/4.25= 4 A

Ix= 600 mA

$\frac{9}{9 + 3} \times 4 = 3\\ \frac{2}{2 + 8} \times 3 = 0.6a \\ = 0.6 \: milli \: amper$

6 0

2 years ago

A(n) ____________________ measures the resistance to current flow in a circuit.

yulyashka [42]

Answer: OHMMETER & MEGOHMMETER:

Explanation: The ohmmeter measures circuit resistance; the megohmmeter measures the high resistance of insulation. A meter used to measure electric current. It is connected as part of a circuit.

6 0

2 years ago

The increasing interconnections of peoples and countries around the world is known as ________.

Irina18 [472]

I think it’s rationalization.
Hope this helps

4 0

3 years ago

Read 2 more answers

An inductor and resistor are connected in parallel to a 120-V, 60-Hz line. The resistor has a resistance of 50 ohms, and the ind

BARSIC [14]

Answer:

Explanation: