Answer:
he must document or remember the order he took it apart so he put it back together
Explanation:
Answer:
And Im still going with B..
Answer:
4.2
Explanation:
The "allowance" is the difference between the maximum shaft size and the minimum hole size.
maximum shaft = C +D = 8.5 +0.1 = 8.6
minimum hole = A -B = 4.8 -0.4 = 4.4
Allowance = 8.6 -4.4 = 4.2
__
For an interference fit, the allowance is negative.
Answer:
a) the cooler
Explanation:
When a tenant leaves a commercial property that he/she leased he can remove his personal items and some trade fixtures. For an item to be a trade fixture it should be:
1- a necessary product for doing business
2- removed without doing any damage to the property
3- removed from the property in a certain period of time.
The cooler only follows these conditions as compared to the other options.
Answer:
False
Explanation :
lever is a rigid bar which turn around a pivot point, called a fulcrum. It is a simple machine and can be use to move a load (or do work). Effort is applied to one part of the lever and it pushes the load at another end. Therefore, the load is not the lever part of the fulcrum or pivot.