Answer:
Explanation:
When 2 gms of steam condenses to water at 100 degree latent heat of vaporization is releases which is calculated as follows
Heat released = mass x latent heat of vaporization
= 2 x 2260 = 4520 J
When 2 gms of water at 100 degree is cooled to ice water at zero degree heat is releases which is calculated as follows
Heat released = mass x specific heat x( 100-0)
= 2 x 4.2 x 100 = 840 J
When 2 gms of water at zero degree condenses to ice at zero degree latent heat of fusion is releases which is calculated as follows
Heat released = mass x latent heat of fusion
= 2 x 334 = 668 J
When 2 grams of steam at 100 degrees Celsius turns to ice at 0 degrees Celsius heat released will be sum of all the heat released as mentioned above ie
4520 + 840 +668 = 6028 J
Explanation:
Q1) What is the speed of the tip of the minute hand of a clock where the hand is of length 7cm?
Ans1) speed, v=st=2πrT=2×227×7×10-260×60=119×10-4=1.22×10-4m/s
<h2>
<em><u>Hope it helps</u></em></h2>
Answer:
1 x 10 -10 whisper at 1m distance.
Explanation:
- Properly fitted ear plugs an reduce noise form 15-30db. Although they are better for low frequency
Answer:
Because the light reflects multiple times until it gets to the Cassegrain focus.
Explanation:
The Cassegrain design can be seen in a reflecting telescope. In this type of design the light is collected by a concave mirror, and then intercepted by a secondary convex mirror, and sends it down to a central opening in the primary mirror (concave mirror), in which a detector is placed (Cassegrain focus)
Since, the light is reflected many times due to Cassegrain design, that leads to shorter telescopes.
Answer:
the power of the solar cell is 1.5 watts
Explanation:
Recall that power is defined as the product of the voltage (V) times the running current (I): Power = V * I.
The only thing we have to take care of before actually performing the operation, is to convert milliamps into Amps, so our answer comes directly in the appropriate units (Watts). 500 mAmps can be written as 0.5 Amps, then, the product becomes:
Power = V * I = 3 V * 0.5 Amps = 1.5 watts