All categories

3 years ago

A vibration system consists of a mass 50 kg, a spring of stiffness 30 kN/m and a damper. The

Engineering

1 answer:

Novay_Z [31]3 years ago

5 0

Answer:

20% of the critical value. Determine (a) the damping factor, (b) the

Explanation:

You might be interested in

Consider a very long, cylindrical fin. The temperature of the fin at the tip and base are 25 °C and 50 °C, respectively. The dia

Mrrafil [7]

Answer:

The fin temperature in °C at a distance of 10 cm from the base = 33.78°C

Explanation:

The following assumptions will be made to solve this problem

- The heat transfer coefficient does not change with the time or distance.

- The temperature of the fins varies just in only one direction.

The temperature of the fin at x = 10 cm = 0.10 m from the base can be calculated from the temperature variation with distance formula for a very long fin.

(T - T∞) = (T₀ - T∞)e⁻ᵐˣ

T = T(x) = temperature at any point along the fin

T∞ = temperature at the tip of the fin = ambient temperature = 25°C

T₀ = temperature at the base of thw fin = 50°C

x = any distance along the length of the fin from the base of the fin = 0.1 m

m = √(hP/KA)

h = Heat transfer coefficient = 123 W/m².K

P = perimeter in contact with the base = πD = π × 0.03 = 0.0943 m

K = thermal conductivity = 150 W/m.K

A = surface area in contact with the base = πD²/4 = π(0.03)²/4 = 0.0007071 m²

m = √(123 × 0.0943)/(150 × 0.0007071)

m = 10.46

mx = 10.46 × 0.1 = 1.046

(T - 25) = (50 - 25) e⁻¹•⁰⁴⁶

T = 25 + 25 e⁻¹•⁰⁴⁶ = 25 + 8.78 = 33.78°C

8 0

3 years ago

Which of the following can cause a flopping sound at the front of the engine

Irina-Kira [14]

B) timing chain too loose

3 0

3 years ago

A flow of 12 m/s passes through a 6 m wide, 2 m deep rectangular channel with a bed slope of 0. 001. If the mean velocity of flo

prohojiy [21]

Answer:

manning's coefficient is 0.0357

Explanation:

Given:

Velocity of flow, v = 12 m/s

Width of the channel, b = 6 m

Depth of the channel, d = 2 m

bed slope, s = 0.001

mean velocity of flow, V = 1 m/s

now, the velocity is given as:

$V= \frac{1}{n}R^{\frac{2}{3}}S^{\frac{1}{2}}$

where,

n is the manning's coefficient

R is hydraulic mean depth

R = (Area of the channel) / (wetted Perimeter of the channel)

now,

R = (2 × 6) / ((2 × 2) + 6)

R = 12 / 10 = 1.2 m

now, on substituting the values in the equation for velocity, we get

$1= \frac{1}{n}1.2^{\frac{2}{3}}(0.001)^{\frac{1}{2}}$

$n= 1.2^{\frac{2}{3}}(0.001)^{\frac{1}{2}}$

n = 0.0357

hence, the value of manning's coefficient is 0.0357

8 0

3 years ago

If you are convicted of D.U.I. a second time in five years, your license may be revoked for up to __________ year/s.

LuckyWell [14K]

If you are convicted of a dui for a second time in five years, your license may be revoked for up to (2) years

5 0

3 years ago

8. What is the purpose of the 300 Log?

Gnom [1K]

Answer:

“An OSHA 300 log is where companies record the injuries that occur at the workplace,” said Luna. “By law, they have to report all the injuries to OSHA.” The OSHA law gives workers and their unions the right to have access to injury logs.

4 0

3 years ago