This problem is describing a gas mixture whose mole fraction of hexane in nitrogen is 0.58 and which is being fed to a condenser at 75 °C and 3.0 atm, obtaining a product at 3.0 atm and 20 °C, so that the removed heat from the system is required.
In this case, it is recommended to write the enthalpy for each substance as follows:
Whereas the specific heat of liquid and gaseous n-hexane are about 200 J/(mol*K) and 160 J/(mol*K) respectively, its condensation enthalpy is 31.5 kJ/mol, boiling point is 69 °C and the specific heat of gaseous nitrogen is about 29.1 J/(mol*K) according to the NIST data tables and 
and 
are the mole fractions in the gaseous mixture. Next, we proceed to the calculation of both heat terms as shown below:
It is seen that the heat released by the nitrogen is neglectable in comparison to n-hexanes, however, a rigorous calculation is being presented. Then, we add the previously calculated enthalpies to compute the amount of heat that is removed by the condenser:
Finally we convert this result to kJ:
Learn more:
Answer:
9.9652g of water
Explanation:
The establishment of the liquid-vapor equilibrium occurs when the vapour of water is equal to vapour pressurem 26.7 mmHg. Using gas law it is possible to know how many moles exert that pressure, thus:
n = PV / RT
Where P is pressure 26,7 mmHg (0.0351atm), V is volume (1.350L), R is gas constant (0.082 atmL/molK) and T is temperature (27°C + 273,15 = 300.15K)
Replacing:
n = 0.0351atm×1.350L / 0.082atmL/molK×300.15K
n = 1.93x10⁻³ moles of water are in gaseous phase. In grams:
1.93x10⁻³ moles × (18.01g / 1mol) = <u><em>0.0348g of water</em></u>
<u><em /></u>
As the initial mass of water was 10g, the mass of water that remains in liquid phase is:
10g - 0.0348g = <em>9.9652g of water</em>
<em />
I hope it helps!
PLEASE HELP I HAVE TO DO THIS BENCHAMRK QUESTION!!!
The chart shows parts of a plant and an animal, at different levels of organization. Consider the plant images. If we are referring to levels of organization in a plant which picture can BEST be used to fill in box Y?
first picture (A
Answer:
Water purification is the process of removing undesirable chemicals, biological contaminants, suspended solids and gases from contaminated water. The goal is to produce water fit for a specific purpose. Most water is purified for human consumption (drinking water), but water purification may also be designed for a variety of other purposes, including meeting the requirements of medical, pharmacological, chemical and industrial applications. In general the methods used include physical processes such as filtration,sedimentation, and distillation, biological processes such as slow sand filters or biologically active carbon, chemical processes such asflocculation and chlorination and the use of electromagnetic radiation such as ultraviolet light.
Extreme lack or loss of water may lead to dehydration of the body and other health complications. For this reason, governments ensure that citizens have access to clean and safe water for domestic use. Clean water is essential in ensuring that no pathogens or impurities are ingested by people, either through direct drinking or through food.
To attain these standards of water, purification is important. Water purification involves physical and chemical processes, which are carried out stepwise to ensure the water is safe and free from any harm. This directional process essay synthesizes the steps, which have to be followed to achieve this task.
In essence, water purification denotes the process used to free water from impurities like bacteria and contaminants. Since the process is aimed at eliminating all the impurities present in the water, it is necessary to apply chemical and physical methods of separation in an orderly manner.
Explanation:
Medium about 3 second? Not sure lol just need more points honestly lol
