All categories

3 years ago

PLS HELP:)

1 answer:

6 0

The incident ray will have an angle of reflection of 30 degrees (made with a surface normal to the mirror surface). The reflected ray will make an angle of 60 degrees (90 - 30 degrees) with the mirror surface.

You might be interested in

An object that is initially not rotating has a constant torque of 3.6 N⋅m applied to it. The object has a moment of inertia of 6

Korolek [52]

Answer:

0.6

Explanation:

Angular acceleration is equal to Net Torque divided by rotational inertia, which is the rotational equivalent to Newton’s 2nd Law. Therefore, angular acceleration is equal to 3.6/6 which is 0.6. Hope this helped!

3 0

2 years ago

A vacuum tube can be used to__. A. change alternating current into direct current B. increase the strength of a signal.. C. turn

vesna_86 [32]

The correct answer of this question is : A) Change alternating current into direct current.

EXPLANATION :

As per the question, we are given vacuum tube. Vacuum tube can be of various types. Normally it contains two electrodes called cathode and anode which are enclosed in an evacuated glass chamber . There are also other types of vacuum tubes which contain extra electrodes like control grid .

The vacuum tube can be used as a rectifier. It means that it can be used as an electronic device which will convert alternating current into direct current. It may be a half wave rectifier or a full wave rectifier. Actually the direct current obtained during the rectification of alternating current is pulsating in nature.

Hence, the correct answer is that a vacuum tube can be used to change alternating current into direct current.

4 0

3 years ago

Read 2 more answers

An airplane is moving at 350 km/hr. If a bomb is

bogdanovich [222]

Answers:

a) -171.402 m/s

b) 17.49 s

c) 1700.99 m

Explanation:

We can solve this problem with the following equations:

$y=y_{o}+V_{oy}t-\frac{1}{2}gt^{2}$ (1)

$x=V_{ox}t$ (2)

$V_{f}=V_{oy}-gt$ (3)

Where:

$y=0 m$ is the bomb's final height

$y_{o}=1.5 km \frac{1000 m}{1 km}=1500 m$ is the bomb's initial height

$V_{oy}=0 m/s$ is the bomb's initial vertical velocity, since the airplane was moving horizontally

$t$ is the time

$g=9.8 m/s^{2}$ is the acceleration due gravity

$x$ is the bomb's range

$V_{ox}=350 \frac{km}{h} \frac{1000 m}{1 km} \frac{1 h}{3600 s}=97.22 m/s$ is the bomb's initial horizontal velocity

$V_{f}$ is the bomb's final velocity

Knowing this, let's begin with the answers:

With the conditions given above, equation (1) is now written as:

$y_{o}=\frac{1}{2}gt^{2}$ (4)

Isolating $t$ :

$t=\sqrt{\frac{2 y_{o}}{g}}$ (5)

$t=\sqrt{\frac{2 (1500 m)}{9.8 m/s^{2}}}$ (6)

$t=17.49 s$ (7)

<h3>a) Final velocity </h3>

Since $V_{oy}=0 m/s$ , equation (3) is written as:

$V_{f}=-gt$ (8)

$V_{f}=-(97.22)(17.49 s)$ (9)

$V_{f}=-171.402 m/s$ (10) The negative sign only indicates the direction is downwards

<h3>c) Range </h3>

Substituting (7) in (2):

$x=(97.22 m/s)(17.49 s)$ (11)

$x=1700.99 m$ (12)

5 0

3 years ago

In a series rlc ac circuit, a second resistor is connected in parallel with the resistor previously in the circuit. as a result

raketka [301]

According to the given statement:

The frequency response does not change, which is the first thing we notice.

The new resistance at the resonance point causes a reduction in the circuit's current flow.
Z = R + R₂

<h3>The definition of series circuits:</h3>

electrical circuit. The path that the entire current takes as it passes through each component makes up a series circuit. Branching is used in parallel circuits to divide the current and limit the amount that flows through each branch.

<h3>How does a series circuit operate?</h3>

According to this definition, there are three principles of series circuits: all parts share the same current, resistances add up to a larger total resistance, and voltage drops add up to a larger total voltage. In the definition of a series circuit, all of these guidelines have their origin.

<h3>According to the given information:</h3>

The impedance of a series circuit is

Z₀² = R² + (X $_L$ -X $_C$ ) ²

The initial resistance impedance shifts to when we add another resistor to the series

Z² = (R + R₂) ² + (X $_L$ - X $_C$ ) ²

Let's examine this sentence.

The frequency response remains unchanged, which is the first thing we notice.
The new resistance at the resonance point causes the circuit's current to decrease.

Z = R + R₂

To know more about electrical circuit visit:

brainly.com/question/1922668

#SPJ4

6 0

1 year ago

What is the formula to find initial velocity?

Inga [223]

Answer:

s = ut + 1/2at^2

Explanation:

s= distance

u= initial velocity

a= acceleration

7 0

3 years ago