Answer:
View Image
Explanation:
You didn't provide me a picture of the opamp.
I'm gonna assume that this is an ideal opamp, therefore the input impedance can be assumed to be ∞ . This basically implies that...
- no current will go in the inverting(-) and noninverting(+) side of the opamp
- V₊ = V₋ , so whatever voltage is at the noninverting side will also be the voltage at the inverting side
Since no current is going into the + and - side of the opamp, then
i₁ = i₂
Since V₊ is connected to ground (0V) then V₋ must also be 0V.
V₊ = V₋ = 0
Use whatever method you want to solve for v_out and v_in then divide them. There's so many different ways of solving this circuit.
You didn't give me what the input voltage was so I can't give you the entire answer. I'll just give you the equations needed to plug in your values to get your answers.
Answer:
W = 12.8 KW
Explanation:
given data:
mass flow rate = 0.2 kg/s
Engine recieve heat from ground water at 95 degree ( 368 K) and reject that heat to atmosphere at 20 degree (293K)
we know that maximum possible efficiency is given as
rate of heat transfer is given as
Maximuim power is given as
W = 0.2038 * 62.7
W = 12.8 KW
Answer:
C. Provides lubrication to parts
Explanation:
Flywheel :
Flywheel is a device which stored the mechanical energy.This energy can be use when more energy required during any operation.Due to high moment of inertia of the flywheel it resist the change in the speed .The flywheel is attached to the crank shaft at the rear side of the engine.
The flywheel perform following function:
1. It connects the crankshaft and the transmission system.
2.It makes the engine operation smooth.
3.It contains gear and other parts of the engine.
But it can not provide lubrication.
C. Provides lubrication to parts
D
Step by step explanation
