Answer: the answer is A(Primary Waves)
Explanation:
p waves stand for primary waves. early seismologists called them that because the waves were the first to arrive at seismometers from some distant quake
Hope this helps plz give me an brainiest
Turn the revolving turret (2) so that the lowest power objective lens (eg. 4x) is clicked into position.
Place the microscope slide on the stage (6) and fasten it with the stage clips.
Look at the objective lens (3) and the stage from the side and turn the focus knob (4) so the stage moves upward. Move it up as far as it will go without letting the objective touch the coverslip.
Look through the eyepiece (1) and move the focus knob until the image comes into focus.
Adjust the condenser (7) and light intensity for the greatest amount of light.
Move the microscope slide around until the sample is in the centre of the field of view (what you see).
Use the focus knob (4) to place the sample into focus and readjust the condenser (7) and light intensity for the clearest image (with low power objectives you might need to reduce the light intensity or shut the condenser).
When you have a clear image of your sample with the lowest power objective, you can change to the next objective lenses. You might need to readjust the sample into focus and/or readjust the condenser and light intensity. If you cannot focus on your specimen, repeat steps 3 through 5 with the higher power objective lens in place. Do not let the objective lens touch the slide!
When finished, lower the stage, click the low power lens into position and remove the slide.
Your microscope slide should be prepared with a coverslip over the sample to protect the objective lenses if they touch the slide.
Do not touch the glass part of the lenses with your fingers. Use only special lens paper to clean the lenses.
Always keep your microscope covered when not in use.
Always carry a microscope with both hands. Grasp the arm with one hand and place the other hand under the base for support.
The type of sensor the meteorologists should use is Radar sensor.
<h3>Who is a meteorologist?</h3>
A meteorologist is a scientist who studies and works in the field of meteorology with the purpose of understanding or predicting the Earth's atmospheric phenomena.
The tools used by meteorologists in studying atmospheric
phenomena or conditions include:
- Thermometer for measuring air and sea surface temperature.
- Barometer for measuring atmospheric pressure.
- Hygrometer for measuring humidity.
- Anemometer for measuring wind speed.
- Pyranometer for measuring solar radiation.
- Rain gauge for measuring rainfall over a set period of time
- Radar sensor for observing severe storms.
Therefore, the type of sensor the meteorologists should use is Radar sensor.
In conclusion, a meteorologist should use Radar sensors to detect and predict the atmospheric phenomena in stormy weather.
Learn more about meteorologist at: brainly.com/question/5145125
#SPJ1
Answer:
The correct answer is - Cyanobacteria; Horizontal gene transfer
Explanation:
According to the endosymbiotic theory it is believed that the eukaryotic plastids (mitochondria and chloroplasts) have developed from symbiotic bacteria, such as cyanobacteria and alpha-proteobacteria.
During this symbiotic process, some genetic material may have been move in between the symbiotic counterparts in a process called Horizontal gene transfer or lateral gene transfer.
thus, the correct answer- Cyanobacteria; Horizontal gene transfer
