which factors affect absorption and reflection of thermal energy? check all that apply. THIS IS A TEST

likoan [24]

The efficiency of the scissor is 200%.

<u>Explanation:</u>

Efficiency is defined as the ratio of output of any instrument or device or machine to the input supplied to it. So the greater the output the greater will be the efficiency of the device.

As here the work done by us on the system is said to be 10 J so this will be equal to the input work done on the system. And the work done by the system i.e., the scissor is 20 J, so this will be the output work.

So, the efficiency is the ratio of output to input as shown below.

Efficiency = $(\frac {20} {10} ) \times 100$ = 200

So, the efficiency of the scissor is 200%.

6 0

3 years ago

Which is not a source of electrical energy in the United States

xenn [34]

Every practical source of energy that you can imagine, as well as a few impractical ones, are used somewhere in the USA.

From whale oil in Alaska, to nuclear energy, to coal, petroleum, natural gas, solar energy, wind energy, and biomass.

Oh ! Geothermal energy and tidal energy aren't too popular, but I'll bet if you looked, you'd find these used too, SOMEwhere in the 50 states.

7 0

3 years ago

A 2 kg basketball has a momentum of 4 kg m/s. What is the ball's velocity?

Mumz [18]

That is the answer to the question
I hope this helps you.
Thank you for your question

4 0

2 years ago

if a Firebird travels at a velocity of 0 to 60 mph in four seconds traveling east what was the acceleration of the Firebird

Tresset [83]

Answer:

6.7 m/s^2

Explanation:

The formula of acceleration is:

$\displaystyle{\vec{a} = \dfrac{\Delta \vec{v}}{\Delta t} = \dfrac{v_2 - v_1}{t_2-t_1}}$

where $\displaystyle{\vec{a}}$ is acceleration, $\displaystyle{\vec{v}}$ is velocity and $\displaystyle{t}$ is time. $\displaystyle{v_2}$ means final velocity. $\displaystyle{v_1}$ means initial velocity, $\displaystyle{t_2}$ means final time and $\displaystyle{t_1}$ means initial time.

We are given that the Firebird travels at velocity of 0 to 60 mph in four seconds. Therefore:

Our initial velocity starts at 0 mph.
Our final velocity is at 60 mph.
Our initial time is 0 second.
Our final time is 4 seconds.

Since it travels to the east then our vector will be positive. However, acceleration has to be in m/s^2 unit (Sl unit) so we'll have to convert from mph (miles per hours) to m/s (meters per second) first.

We know that:

A mile equals to 1609.344 meters.
An hour equals to 60 minutes which a minute equals to 60 seconds. So 60 minutes will equal to 3600 seconds.

Now we divide 1609.344 by 3600 to find a unit rate of m/s:

$\displaystyle{\dfrac{1609.344}{3600} \ \, \sf{m/s}}\\\\\displaystyle{= 0.44704 \ \, \sf{m/s}}$

Now multiply 0.44704 m/s by 0 and 60 to get velocity in m/s unit:

Initial velocity = 0 m/s
Final velocity = 60 * 0.44704 = 26.82 m/s

Time is already in second so no need for conversion. Substitute known information in the formula:

$\displaystyle{\vec{a} = \dfrac{26.82-0}{4-0}}\\\\\displaystyle{\vec{a} = \dfrac{26.82}{4}}\\\\\displaystyle{\vec{a} = 6.7 \ \, \sf{m/s^2}}$

Therefore, the Firebird will accelerate at the rate of 6.7 m/s^2.

3 0

1 year ago

What is the difference in light that is refracted compared to the light that is reflected?

Kruka [31]

Answer:

Reflection is when light bounces off an object, while refraction is when light bends while passing through an object.

8 0

3 years ago

Read 2 more answers

which factors affect absorption and reflection of thermal energy? check all that apply. THIS IS A TEST​

which factors affect absorption and reflection of thermal energy? check all that apply. THIS IS A TEST