emf generated by the coil is 1.57 V
Explanation:
Given details-
Number of turns of wire- 1000 turns
The diameter of the wire coil- 1 cm
Magnetic field (Initial)= 0.10 T
Magnetic Field (Final)=0.30 T
Time=10 ms
The orientation of the axis of the coil= parallel to the field.
We know that EMF of the coil is mathematically represented as –
E=N(ΔФ/Δt)
Where E= emf generated
ΔФ= change inmagnetic flux
Δt= change in time
N= no of turns*area of the coil
Substituting the values of the above variables
=1000*3.14*0.5*10-4
=.0785
E=0.0785(.2/10*10-3)
=1.57 V
Thus, the emf generated is 1.57 V
Answer:
Explanation:
This will be possible when setting them up in summer with a certain quantity of sag, they have already know that the cables won't be able to sag any further because of the heat. During winter, when the cables contract because of the cold weather, the sag will therefore be reduced, but much tension will not be put on the cables.
Answer:
B. with each component having an individual address
Explanation:
A data bus is a system within a computing system, that consists of a set of wires or connectors, that provides transportation for data. A data bus can transfer data and information through a computing system, or between two or more computing systems. Each component in the computer has its own unique address by which data or information is sent to it, to or fro the central processing unit, and the data or information travelling through the data bus, which serves as the highway, reaches each component using this address. This is analogous to the postal service system of moving letters and packages, through a series of networks that locates the address of the receiver.
Answer:
a)W=12.62 kJ/mol
b)W=12.59 kJ/mol
Explanation:
At T = 100 °C the second and third virial coefficients are
B = -242.5 cm^3 mol^-1
C = 25200 cm^6 mo1^-2
Now according isothermal work of one mole methyl gas is
W=-
a=
b=
from virial equation
And
a=
b=
Now calculate V1 and V2 at given condition
Substitute given values = 1 x 10^5 , T = 373.15 and given values of coefficients we get
Solve for V1 by iterative or alternative cubic equation solver we get
Similarly solve for state 2 at P2 = 50 bar we get
Now
a=241.33
b=30780
After performing integration we get work done on the system is
W=12.62 kJ/mol
(b) for Z = 1 + B' P +C' P^2 = PV/RT by performing differential we get
dV=RT(-1/p^2+0+C')dP
Hence work done on the system is
a=
b=
by substituting given limit and P = 1 bar , P2 = 50 bar and T = 373 K we get work
W=12.59 kJ/mol
The work by differ between a and b because the conversion of constant of virial coefficients are valid only for infinite series