Answer:
See explanation
Explanation:
We have to convert to angular velocity in rads-1 as follows;
Angular velocity in rad/s = 2π/60 × 1900 rpm = 199 rad/s
Given that
angular velocity =angle turned /time taken
Time taken = angle turned/angular velocity
Converting 35° to radians we have;
35 × π/180 = 0.61 radians
Time taken = 0.61 radians/199 rad/s
Time taken = 0.0031 seconds
Answer:
(a) 83475 MW
(b) 85.8 %
Explanation:
Output power = 716 MW = 716 x 10^6 W
Amount of water flows, V = 1.35 x 10^8 L = 1.35 x 10^8 x 10^-3 m^3
mass of water, m = Volume x density = 1.35 x 10^8 x 10^-3 x 1000
= 1.35 x 10^8 kg
Time, t = 1 hr = 3600 second
T1 = 25.4° C, T2 = 30.7° C
Specific heat of water, c = 4200 J/kg°C
(a) Total energy, Q = m x c x ΔT
Q = 1.35 x 10^8 x 4200 x (30.7 - 25.4) = 3 x 10^12 J
Power = Energy / time
Power input = 
Power input = 83475 MW
(b) The efficiency of the plant is defined as the ratio of output power to the input power.
Thus, the efficiency is 85.8 %.
Answer:
By teh way is isn't it question of law or science and the picture is of what electric light or not I have read it so I was asking isn't is question of science
Answer:
-47.04
Explanation:
Divide 12 m by 2.5 m/s which equals 4.8s
And then use 4.8s to multiply it with -9.8
4.8(-9.8)= -47.04 m/s
Hope this helped!! :)
In order to create a charged object you need to transfer electrons either away or to the object by induction, conduction, or friction
Induction is without contact(like bringing a charged object to a electroscope charges the leaves at the bottom)
Conduction is with contact(like the previous answer, wore touching transfers the charge from a source to the object)
Friction(rubbing a balloon on wool)
