Answer:
Gc(s) = 
Explanation:
comparing the standard approximation with the plot attached we can tune the PI gains so that the desired response is obtained. this is because the time requirement of the setting is met while the %OS requirement is not achieved instead a 12% OS is seen from the plot.
attached is the detailed solution and the plot in Matlab
Answer:
C = 0.22857 ng / m³
Explanation:
Let's solve this problem for part the total time in the kitchen is
t = 2h (60 min / 1h) = 120 min
The concentration (C) quantity of benzol pyrene is the initial quantity plus the quantity generated per area minus the quantity eliminated by the air flow. The amount removed can be calculated assuming that an amount of extra air that must be filled with the pollutant
amount generated
C = co + time_generation rate / (area_house + area_flow)
C = 0.2 + 0.01 120 / (40+ 2)
C = 0.22857 ng / m³
Answer:
Q=0.95 W/m
Explanation:
Given that
Outer diameter = 0.3 m
Thermal conductivity of material
So the mean conductivity
So heat conduction through cylinder
Q=0.95 W/m
Answer:
#include <stdio.h>
typedef struct InventoryTag_struct {
int itemID;
int quantityRemaining;
} InventoryTag;
int main(void) {
InventoryTag redSweater;
redSweater.itemID = 314;
redSweater.quantityRemaining = 500;
/* Your solution goes here */
printf("Inventory ID: %d, Qty: %d\n",redSweater.itemID,redSweater.quantityRemaining);
getchar();
return 0;
}
Explanation:
