Answer:
YES
Explanation:
If we connect batteries in series then the output voltage is the sum of the individual voltage of each battery i.e if you connect three 12 volts batteries in series then their output voltage will be 12+12+12=36 volts, but the current rating of the batteries in series will be same of the individual battery rating in 'mah'.
But when we connect the batteries in parallel their voltage is not added but their current rating in mah is addition of their individual rating.
So, If you want 24 volts from three 12 volts battery then you can connect two of them in series and the other one in parallel with them this will give 24 volts and the current will be addition of the two series batteries and the third which is in parallel with them. You can use this configuration if current value is not a big factor.
Answer:
<em>d. floor spans exceed that which is economical with site-cast or hollow-core slabs and exceed 60 feet.</em>
<em></em>
Explanation:
<em>
Double tee slabs are prestressed concrete castings usually about 100 m to 150 m long</em>. <em>They are usually used in the construction industry in structures requiring a long floor span (or roof span) exceeding 60 feet in length, that is required to bear additional load (additional load carrying capability</em>). Double tee slabs are usually employed in construction because they shorten construction time. reduce congestion at the construction site, and also reduce construction cost.
<em>They are the required choice in construction when the cost of site casting or hollow-core slabs is no longer economical due to the length of the structure exceeding 60 feet.</em>
Given that,
Mass of the object 1, m = 107.01 grams
To find,
Force on the object.
Solution,
The force acting on the object is gravitational force. The force is given by the formula as follow :
F = mg
g is acceleration due to gravity
F = 0.10701 kg × 9.8 m/s²
F = 1.048 N
So, the force acting on object 1 is 1.048 N.
Answer:
Machinist
Explanation:
A skilled worker with the ability to operate computer numerically controlled (CNC) machines is qualified to work in a machinist position.
A machinist is a person who is properly skilled and consists of advanced knowledge regarding the functions of a CNC machine. He can use different mechanisms and complex numerical functions of the machine to carry out different tasks. Any person who lacks the official learning of mechanisms cannot operate such machines effectively.
