Answer: A force must cause a displacement in order for work to be done. A book falls off a table and free falls to the ground. Yes. This is an example of work.
Explanation:
Answer:
it b
Explanation:
bc A water droplet falling in the atmosphere is spherical
The air pressure in the pressurized tank will be 24014.88 N/m²,196.2 N/m²,2084.625 N/m².
<h3 /><h3>What is pressure?</h3>
The force applied perpendicular to the surface of an item per unit area across which that force is spread is known as pressure.
It is denoted by P. The pressure relative to the ambient pressure is known as gauge pressure.
Pressure is found as the product of the density,acceleraton due to gravity and the height.
P₁=ρ₁gh₁
P₁=13,600 kg/m³×9.81 (m/s²)×0.18 m
P₁=24014.88 N/m²
P₂=ρ₂gh₂
P₂= 1000 kg/m³×9.81 (m/s²)×00.2 m
P₂=196.2 N/m²
P₃=ρ₃gh₃
P₃=850 kg/m³×9.81 (m/s²)×0.25
P₃=2084.625 N/m²
Hence,the air pressure in the pressurized tank will be 24014.88 N/m²,196.2 N/m²,2084.625 N/m².
To learn more about the pressure refer to the link;
brainly.com/question/356585
#SPJ4
Answer:
15.07 ksi
Explanation:
Given that:
Pitch (P) = 5 teeth/in
Pressure angle (
) = 20°
Pinion speed (
) = 2000 rev/min
Power (H) = 30 hp
Teeth on gear (
) = 50
Teeth on pinion (
) = 20
Face width (F) = 1 in
Let us first determine the diameter (d) of the pinion.
Diameter (d) = 
=
= 4 in
From the values of Lewis Form Factor Y for ( ) = 20 ; at 20°
Y = 0.321
To find the velocity (V); we use the formula:
V = 2094.40 ft/min
For cut or milled profile; the velocity factor 
can be determined as follows:
= 2.0472
However, there is need to get the value of the tangential load
, in order to achieve that, we have the following expression
Finally, the bending stress is calculated via the formula:
15.07 ksi
∴ The estimate of the bending stress = 15.07 ksi
Answer:
velocity = frequency * wavelength
Given the wavelength one must also have the frequency.
