Answer:
there hope it can help.......
Answer:
8.24μm
Explanation:
The theory of brittle fracture was used to solve this problem.
And if you follow through with the attachment made a the subject of the formula
Such that,
a = 2x(69x10⁹)x0.3/pi(40x10⁶)²
= 4.14x10¹⁰/5.024x10¹⁵
= 8.24x10^-06
= 8.24μm
This is the the maximum length of the surface flaw
Answer:
A continuity test
Explanation:
A continuity test is used to verified that current will flow in an electrical circuit, it performed by placing a small voltage across the chosen path. continuity test ensure that the equipment grounding conductor is electrically continuous and this test is perform on all the cord sets, receptacles that aren't part of a building or structure's permanent wiring, and cord-and-plug connected equipment required to be grounded. example of equipment used in testing current flow in continuity test are Analog multi-meter, voltage/continuity tester etc.
Continuity test and terminal connection test are the two test required by OSHA on all electrical equipment
Answer:
The oil reduced friction between the moving parts of the skateboard. ( A )
Explanation:
The oil reduced Friction between the moving parts of the skateboard and this is because the reduction in friction between moving parts causes an increase in speed.
Remy will oil the moving parts that connects the wheels of the skateboard to the Board, because this is where the most friction is found. the friction between the wheels and the ground cannot be affected by oiling the wheels