When the reaction equation is:
CaSO3(s) → CaO(s) + SO2(g)
we can see that the molar ratio between CaSO3 & SO2 is 1:1 so, we need to find first the moles SO2.
to get the moles of SO2 we are going to use the ideal gas equation:
PV = nRT
when P is the pressure = 1.1 atm
and V is the volume = 14.5 L
n is the moles' number (which we need to calculate)
R ideal gas constant = 0.0821
and T is the temperature in Kelvin = 12.5 + 273 = 285.5 K
so, by substitution:
1.1 * 14.5 L = n * 0.0821 * 285.5
∴ n = 1.1 * 14.5 / (0.0821*285.5)
= 0.68 moles SO2
∴ moles CaSO3 = 0.68 moles
so we can easily get the mass of CaSO3:
when mass = moles * molar mass
and we know that the molar mass of CaSO3= 40 + 32 + 16 * 3 = 120 g/mol
∴ mass = 0.68 moles* 120 g/mol = 81.6 g
Moles of Hydrogen present: 100 / 2 = 50 moles
Moles of Nitrogen present: 200 / 28 = 7.14 moles
Hydrogen required by given amount of nitrogen = 7.14 x 3 = 21.42 moles
Hydrogen is excess so we will calculate the Ammonia produced using Nitrogen.
Molar ratio of Nitrogen : Ammonia = 1 : 2
Moles of ammonia = 7.14 x 2 = 14.28 moles
<u>Answer:</u>
Pyrite leaves behind a green-black streak when it is rubbed against an unglazed porcelain plate as a part of the streak test process.
<u>Explanation:</u>
Different minerals produce different coloured streaks when rubbed against a white ceramic or porcelain streak plate. This streak test is done to identify the mineral and distinguish the same from other minerals that look similar in colour and texture.
It must be ensured that the test is done on clean and fresh specimens of the mineral and that there must be no contaminants. Pyrite specimens are usually brass-yellow colour but it leaves a green-black streak when the streak test is done.
Answer:
NaOH and HCl
Explanation:
The reaction of sodium hydroxide, NaOH, with hydrochloric acid, HCl, produces NaCl and water.
