If a tank can be pressurized to a maximum of 500 lb/in2 (psi), and the area is 20 in2. What is the most force that should be exe
1 answer:
You might be interested in
Answer:
a)
b)
c)
Explanation:
a) Let's calculate the work done by the rocket until the thrust ends.
But we know the work is equal to change of kinetic energy, so:
b) Here we have a free fall motion, because there is not external forces acting, that is way we can use the free-fall equations.
At the maximum height the velocity is 0, so v(f) = 0.
c) Here we can evaluate the motion equation between the rocket at 25 m from the ground and the instant before the rocket touch the ground.
Using the same equation of part b)
The minus sign of 25 means the zero of the reference system is at the pint when the thrust ends.
I hope it helps you!
Answer:
a) the output voltage is 50 V
b)
- the average inductor current is 10 A
- the maximum inductor current is 13 A
- the maximum inductor current is 7 A
c) the output voltage ripple is 0.006 or 0.6%V₀
d) the average current in the diode under ideal components is 4 A
Explanation:
Given the data in the question;
a) the output voltage
V₀ = V/( 1 - D )
given that; V = 20 V, D = 0.6
we substitute
V₀ = 20 / ( 1 - 0.6 )
V₀ = 20 / 0.4
V₀ = 50 V
Therefore, the output voltage is 50 V
b)
- the average inductor current
= V
/ ( 1 - D )²R
given that R = 12.5 Ω, V = 20 V, D = 0.6
we substitute
= 20 / (( 1 - 0.6 )² × 12.5)
= 20 / (( 0.4)² × 12.5)
= 20 / ( 0.16 × 12.5 )
= 20 / 2
= 10 A
Therefore, the average inductor current is 10 A
- the maximum inductor current
= [V
/ ( 1 - D )²R] + [ V
given that, R = 12.5 Ω, V = 20 V, D = 0.6, L = 10 μH, T = 1/200 kHz = 5 hz
we substitute
= [20 / (( 1 - 0.6 )² × 12.5)] + [ (20 × 0.6 × 5) / (2 × 10) ]
= [20 / 2 ] + [ 60 / 20 ]
= 10 + 3
= 13 A
Therefore, the maximum inductor current is 13 A
- The minimum inductor current
= [V
/ ( 1 - D )²R] - [ V
given that, R = 12.5 Ω, V = 20 V, D = 0.6, L = 10 μH, T = 1/200 kHz = 5 hz
we substitute
= [20 / (( 1 - 0.6 )² × 12.5)] - [ (20 × 0.6 × 5) / (2 × 10) ]
= [20 / 2 ] -[ 60 / 20 ]
= 10 - 3
= 7 A
Therefore, the maximum inductor current is 7 A
c) the output voltage ripple
ΔV₀/V₀ = D/RCf
given that; R = 12.5 Ω, C = 40 μF = 40 × 10⁻⁶ F, D = 0.6, f = 200 Khz = 2 × 10⁵ Hz
we substitute
ΔV₀/V₀ = 0.6 / (12.5 × (40 × 10⁻⁶) × (2 × 10⁵) )
ΔV₀/V₀ = 0.6 / 100
ΔV₀/V₀ = 0.006 or 0.6%V₀
Therefore, the output voltage ripple is 0.006 or 0.6%V₀
d) the average current in the diode under ideal components;
under ideal components; diode current = output current
hence the diode current will be;
= V₀/R
as V₀ = 50 V and R = 12.5 Ω
we substitute
= 50 / 12.5
= 4 A
Therefore, the average current in the diode under ideal components is 4 A
