Answer:
The specific heat of the metal is 2.09899 J/g℃.
Explanation:
Given,
For Metal sample,
mass = 13 grams
T = 73°C
For Water sample,
mass = 60 grams
T = 22°C.
When the metal sample and water sample are mixed,
The addition of metal increases the temperature of the water, as the metal is at higher temperature, and the addition of water decreases the temperature of metal. Therefore, heat lost by metal is equal to the heat gained by water.
Since, heat lost by metal is equal to the heat gained by water,
Qlost = Qgain
However,
Q = (mass) (ΔT) (Cp)
(mass) (ΔT) (Cp) = (mass) (ΔT) (Cp)
After mixing both samples, their temperature changes to 27°C.
It implies that
, water sample temperature changed from 22°C to 27°C and metal sample temperature changed from 73°C to 27°C.
Since, Specific heat of water = 4.184 J/g°C
Let Cp be the specific heat of the metal.
Substituting values,
(13)(73°C - 27°C)(Cp) = (60)(27°C - 22℃)(4.184)
By solving, we get Cp =
Therefore, specific heat of the metal sample is 2.09899 J/g℃.
B because once the circuit is burned the lights will all go of
<span>PbO
Let's look at each of the 4 compounds and see what's needed.
PbO.
* Oxygen has a valance shell that's missing 2 electrons and wants to get those 2 elections. Lead donates them, so you have a Lead (II) ions. This is a correct choice.
PbCl4
* Chlorine wants to grab 1 electron to fill it's valance shell and Lead donates that election. However, there's 4 chlorine atoms and every one of them wants and electron, and lead is donating all 4 of the desired electrons making the Lead (IV) ion. So this is a bad choice.
Pb2O
* Oxygen still wants 2 electrons and gets them from the lead. But there's 2 lead atoms and each of them donates 1 election making for 2 Lead(I) ions. So this too is a bad choice.
Pb2S
* Sulfur is in the same column of the periodic table as oxygen and if this compound were to exist would have similar properties as Pb2O and would have Lead(I) ions. So this is a bad choice.</span>
Answer:
The gas that Dr. Brightguy added was O₂
Explanation:
Ideal Gases Law to solve this:
P . V = n . R . T
Firstly, let's convert 736 Torr in atm
736 Torr is atmospheric pressure = 1 atm
20°C = 273 + 20 = 293 T°K
125 mL = 0.125L
0.125 L . 1 atm = n . 0.082 L.atm / mol.K . 293K
(0.125L .1atm) / (0.082 mol.K /L.atm . 293K) = n
5.20x10⁻³ mol = n
mass / mol = molar mass
0.1727 g / 5.20x10⁻³ mol = 33.2 g/m
This molar mass corresponds nearly to O₂
Answer:
B
Explanation:
<em>Both plain and plateau have flat surfaces. However, a plain is located in a low-lying area while a plateau is located on an elevated area. In essence, a plateau can be viewed as an elevated plain or a plain that is bordered by cliffs.</em>
The correct option is B.