The relationship between the mass m of a material, its volume V, and its density D is

Physics

2 answers:

Alex787 [66]4 years ago

7 0

The correct answer is c) DV = m

san4es73 [151]4 years ago

6 0

The answer is C........

You might be interested in

A series circuit that is connected to a 50 V, 60 Hz source is made up of 25 ohm resistor, capacite wieh X= 18 ohms, and inductor

Allisa [31]

Answer:

the impedance of the circuit is 25.7 ohms.

Explanation:

It is given that,

Voltage, V = 50 volts

Frequency, f = 60 Hz

Resistance, R = 25 ohms

Capacitive resistance, $X_C=18\ ohms$

Inductive resistance, $X_L=24\ ohms$

We need to find the impedance of the circuit. It is given by :

$Z=\sqrt{R^2+(X_L-X_C)^2}$

$Z=\sqrt{25^2+(24-18)^2}$

Z = 25.7 ohms

So, the impedance of the circuit is 25.7 ohms. Hence, this is the required solution.

6 0

3 years ago

Why is it that the weight of an object weighing 1N air, weighs more when immersed in water ?

Anni [7]

There is no "why", because that's not what happens. The truth is
exactly the opposite.

Whatever the weight of a solid object is in air, that weight will appear
to be LESS when the object is immersed in water.

The object is lifted by a force equal to the weight of the fluid it displaces.
It displaces the same amount of air or water, and any amount of water
weighs more than the same amount of air. So the force that lifts the
object in water is greater than the force that lifts it in air, and the object
appears to weigh less in the water.

4 0

3 years ago

A uniform brick of length 21 m is placed over

Paha777 [63]

Answer:

15.75 m

Explanation:

First, let's look at the top brick by itself. In order for it not to tip over the bottom brick, its center of gravity must be right at the edge of the bottom brick. So the edge of the top brick must be 10.5 m from the edge of the bottom brick.

Now let's look at both bricks as a combined mass. We know the total length of this combined brick is 10.5 m + 21 m = 31.5 m. And we know that for it to not tip over the edge of the surface, its center of gravity must be at the edge. So the edge of the combined brick must be 31.5 m / 2 = 15.75 m from the edge of the surface.