Answer:
Observed time, t = 5.58 s
Explanation:
Given that,
Speed of light in a vacuum has the hypothetical value of, c = 18 m/s
Speed of car, v = 14 m/s along a straight road.
A home owner sitting on his porch sees the car pass between two telephone poles in 8.89 s.
We need to find the time the driver of the car measure for his trip between the poles. The relation between real and observed time is given by :
t is observed time.
So, the time observed by the driver of the car measure for his trip between the poles is 5.58 seconds.
Answer:
4 seconds
Explanation:
Average acceleration is change in velocity over change in time:
a = Δv / Δt
Δt = Δv / a
Δt = (15 m/s - 5 m/s) / 2.5 m/s²
Δt = 4 s
Answer:
1. Urea, (d)Fertilizer
2. Combines, (c) Harvesting and threshing
3. Silos, (b) Storage of grains
4. Seed drills, (a) Sowing seeds
5. Irrigation, (f) Sprinklers
6. Tilling, (e) Preparation of soil
Explanation:
1) Urea is a widely used and important fertilizer in the agricultural industry
2) The combine harvester combines three categories of harvesting grain drops such as threshing reaping and winnowing
3) Silos are used to store grains
4) A seed drill is a seed planting mechanism for burying seeds to a particular depth during seed planting
5) Irrigation is the application of required volume of water to plants
6) Tilling is the digging, turning, and staring operations meant to prepare the soil.
1) At the moment of being at the top, the piston will not only tend to push the penny up but will also descend at a faster rate at which the penny can reach in 'free fall', in that short distance. Therefore, at the highest point, the penny will lose contact with the piston. Therefore the correct answer is C.
2) To solve this problem we will apply the equations related to the simple harmonic movement, hence we have that the acceleration can be defined as
Where,
a = Acceleration
A = Amplitude
= Angular velocity
From a reference system in which the downward acceleration is negative due to the force of gravity we will have to
From the definition of frequency and angular velocity we have to
Therefore the maximum frequency for which the penny just barely remains in place for the full cycle is 2.5Hz
Answer:
<em>a. True</em>
<em></em>
Explanation:
I'll assume the question is about magnetic latches and locks.
Magnetic door locks use an electromagnetic force to stop doors from opening, so they are ideal for security. There are two main types of electric locking devices. Locking devices can either be a fail-secure locking device that remains locked when power is lost, or a fail-safe locking device that is unlocked when de-energized. An electromagnetic lock creates a magnetic field when energized or powered up, this causes an electromagnet and armature plate to become attracted to each other strongly enough to keep a door from opening.