Answer:
0.36 A.
Explanation:
We'll begin by calculating the equivalent resistance between 35 Ω and 20 Ω resistor. This is illustrated below:
Resistor 1 (R₁) = 35 Ω
Resistor 2 (R₂) = 20 Ω
Equivalent Resistance (Rₑq) =?
Since, the two resistors are in parallel connections, their equivalence can be obtained as follow:
Rₑq = (R₁ × R₂) / (R₁ + R₂)
Rₑq = (35 × 20) / (35 + 20)
Rₑq = 700 / 55
Rₑq = 12.73 Ω
Next, we shall determine the total resistance in the circuit. This can be obtained as follow:
Equivalent resistance between 35 Ω and 20 Ω (Rₑq) = 12.73 Ω
Resistor 3 (R₃) = 15 Ω
Total resistance (R) in the circuit =?
R = Rₑq + R₃ (they are in series connection)
R = 12.73 + 15
R = 27.73 Ω
Finally, we shall determine the current. This can be obtained as follow:
Total resistance (R) = 27.73 Ω
Voltage (V) = 10 V
Current (I) =?
V = IR
10 = I × 27.73
Divide both side by 27.73
I = 10 / 27.73
I = 0.36 A
Therefore, the current is 0.36 A.
Answer:
If an object has a fast velocity, the dots on a ticker tape diagram will be far apart.
Answer:
d. H + O2 ------ H2O
that's the formation of water
Velocity is a vector. Therefore, it depends on the direction. Pilots need to know the direction of wind, not just the speed. If the pilot is going South, and there's 5 mph wind going South, they'll be happy, but if the wind is going 5 mph North, they'll be going against the wind.
Answer:
this the way that hydraulic pump works:
The system of hydraulic jack lifts the heavy objects by transferring the oil from one chamber to another.
Through the suction valves into the two cylinders which creates pressure distributing the fluid equally to the points causing the objects to lift up.
hope these points helped u
any confusion then comment it
