Answer:
43.54
Explanation:
Effective overburden pressure will be 
Overburden correction is given by
Where and are effective overburden pressure and overburden correction
Substituting the value of overburden pressure then
Taking hammer efficiency of 0.8, drill rod length correction factor of 0.9 and borehole correction factor of 1.05 then corrected SPT value will be
Answer:
they can organize a rally to pick up trash and plastic on the ground?
There is no SI "base unit" of density.
(Any unit of mass) divided by (any unit of volume) is
a valid unit of density.
The units of density that are seen most often are
(gram per cm³) and (kgm per meter³) .
Answer:
0.44
Explanation:
Poisson's ratio is:
ν = (3K − E) / 6K
where K is the bulk modulus and E is Young's modulus.
Young's modulus is:
E = FL / (AΔL)
where F is the force, L is the initial length, A is the cross sectional area, and ΔL is the change in length.
E = (20 kg × 9.8 m/s²) (1.7 m) / (π (0.02 m)² × 0.0005 m)
E = 0.530×10⁹ Pa
Bulk modulus is:
K = -ΔP / (ΔV/V)
where ΔP is the change in pressure, ΔV is the change in volume, and V is the initial volume.
K = -(180 atm × 101325 Pa/atm) / (-0.012)
K = 1.52×10⁹ Pa
Therefore, the Poisson's ratio is:
ν = (3(1.52×10⁹ Pa) − 0.530×10⁹ Pa) / 6(1.52×10⁹ Pa)
ν = (3(1.52) − 0.530) / 6(1.52)
ν = 0.442
Rounded to 2 significant figures, the Poisson's ratio is 0.44.
