Katherine paid $1.25 for a bottle of water
Answer:
Explanation:
in parallel combination equivalent resistence =
1/R=1/R1 + 1/R2
1/2=1/15+1/30
1/2=1*2+1*1/30
1/R=3/30
R*3=30*1
R=30/3
R=10 ohm
Answer:
-2.13 V
Explanation:
Given parameters are:
m/s
m/s
C
kg
By conservation of energy principle, we know that the potential difference between two points is equal to the change in the kinetic energy between these points.

Hence,

⇒
V
Answer:
A=50mΩ
B≅50mΩ
Explanation:
A) To answer this question we have to use the Current Divider Rule. that rule says:
(1)
Itotal represents the new maximun current, 50mA, Ix is the current going through the 100 ohms resistor, and Req. is the equivalent resitor.
We now have a set of two resistor in parallel, so:
(2)
where R1 is the resitor we have to calculate, and R2 is the 100 ohms resistor (25 uA).
substituting and rearranging (2)
(3)
Now substituting (3) in (1).

solving this, The value of R1 is: 50mΩ
This value of R1 will guaranty that the ammeter full reflection willl be at 50mA.
Given that R2 (100ohm) it too much bigger than 50mΩ, the equivalent resistor will tend to 50mΩ
If you substitude this values on (2) Req. will be 49.97 mΩ.
Answer:
10 cm/sec
Explanation:
using formula velocity = frequency * wave length
where: f=1/T
1/1=1
so frequency will be 1HZ ( due to 1 oscillation in 1 sec)
wave length will be 10 cm because while sloshing cup hold (1/2) half full length.
velocity = 1*10 = 10cm/sec.
velocity = 10 cm/sec