A liquid jet Vj of diameter Dj strikes a fixed cone and deflects back as a conical sheet at the same velocity. Find the cone ang
1 answer:
You might be interested in
Answer:
Explanation:
Given conditions
1)The stress on the blade is 100 MPa
2)The yield strength of the blade is 175 MPa
3)The Young’s modulus for the blade is 50 GPa
4)The strain contributed by the primary creep regime (not including the initial elastic strain) was 0.25 % or 0.0025 strain, and this strain was realized in the first 4 hours.
5)The temperature of the blade is 800°C.
6)The formula for the creep rate in the steady-state regime is dε /dt = 1 x 10-5 σ4 exp (-2 eV/kT)
where: dε /dt is in cm/cm-hr σ is in MPa T is in Kelvink = 8.62 x 10-5 eV/K
Young Modulus, E = Stress, /Strain, ∈
initial Strain,
creep rate in the steady state
but Tinitial = 0
solving the above equation,
we get
Tfinal = 2459.82 hr
Answer:
Mechanical Efficiency = 83.51%
Explanation:
Given Data:
Pressure difference = ΔP=1.2 Psi
Flow rate =
Power of Pump = 3 hp
Required:
Mechanical Efficiency
Solution:
We will first bring the change the units of given data into SI units.
Now we will find the change in energy.
Since it is mentioned in the statement that change in elevation (potential energy) and change in velocity (Kinetic Energy) are negligible.
Thus change in energy is
As we know that Mass = Volume x density
substituting the value
Energy = Volume * density x ΔP / density
Change in energy = Volumetric flow x ΔP
Change in energy = 0.226 x 8.274 = 1.869 KW
Now mechanical efficiency = change in energy / work done by shaft
Efficiency = 1.869 / 2.238
Efficiency = 0.8351 = 83.51%
Answer:
D. N= 11. 22 rad/s (CW)
Explanation:
Given that
Form factor R = 8
Speed of sun gear = 5 rad/s (CW)
Speed of ring gear = 12 rad/s (CW)
Lets take speed of carrier gear is N
From Algebraic method ,the relationship between speed and form factor given as follows
here negative sign means that ring and sun gear rotates in opposite direction
Lets take CW as positive and ACW as negative.
Now by putting the values
N= 11. 22 rad/s (CW)
So the speed of carrier gear is 11.22 rad/s clockwise.