A <u>centrifugal switch</u> is used commonly in open split-phase motors to disconnect the start winding from the electrical circuit when the motor reaches approximately 75% of its rated speed.
Hope that helps!
Answer:
1200KJ
Explanation:
The heat dissipated in the rotor while coming down from its running speed to zero, is equal to three times its running kinetic energy.
P (rotor-loss) = 3 x K.E
P = 3 x 300 = 900 KJ
After coming to zero, the motor again goes back to running speed of 1175 rpm but in opposite direction. The KE in this case would be;
KE = 300 KJ
Since it is in opposite direction, it will also add up to rotor loss
P ( rotor loss ) = 900 + 300 = 1200 KJ
Answer:
(a) The magnitude of force is 116.6 lb, as exerted by the rod CD
(b) The reaction at A is (-72.7j-38.1k) lb and at B it is (37.5j) lb.
Explanation:
Step by step working is shown in the images attached herewith.
For this given system, the coordinates are the following:
A(0, 0, 0)
B(26, 0, 0)
And the value of angle alpha is 20.95°
Hope that answers the question, have a great day!
Answer:
The minimum diameter for each cable should be 0.65 inches.
Explanation:
Since, the load is supported by two ropes and the allowable stress in each rope is 1500 psi. Therefore,
(1/2)(Weight/Cross Sectional Area) = Allowable Stress
Here,
Weight = 1000 lb
Cross-sectional area = πr²
where, r = minimum radius for each cable
(1/2)(1000 lb/πr²) = 1500 psi
500 lb/1500π psi = r²
r = √1.061 in²
r = 0.325 in
Now, for diameter:
Diameter = 2(radius) = 2r
Diameter = 2(0.325 in)
<u>Diameter = 0.65 in</u>
Answer is: $637.28; just did the math but i really don’t want to type it all out.
