Answer:
Explanation:
The formula to determine the size of a capillary tube is
h = 2•T•Cos θ / r•ρ•g
Where
h = height of liquid level
T = surface tension
r = radius of capillary tube
ρ = density of liquid
θ = angle of contact = 0°
g =acceleration due to gravity=9.81m/s²
The liquid is water then,
ρ = 1000 kg / m³
Given that,
T = 0.0735 N/m
h = 0.25mm = 0.25 × 10^-3m
Then,
r = 2•T•Cos θ / h•ρ•g
r = 2 × 0.0735 × Cos0 / 2.5 × 10^-3 × 1000 × 9.81
r = 5.99 × 10^-3m
Then, r ≈ 6mm
The radius of the capillary tube is 6mm
So, the minimum size is
Volume = πr²h
Volume = π × 6² × 0.25
V = 2.83 mm³
The minimum size of the capillary tube is 2.83mm³
Adaptation will mean taking action to minimize the negative effects of change. ... the use of new tools and techniques for decision-making, For example, projected increases in drought, fire, windstorms, and insect and disease outbreaks are expected to result in greater tree mortality. Fewer trees will reduce Canada’s timber supply, which in turn will affect the economic competitiveness of Canada’s forest industry. This would leave forestry-dependent communities vulnerable to job losses, closure of forestry processing facilities and an overall economic slump.
Answer:
It will have a longer wavelength
Explanation:
When an electric stove is hot and gives dull red glow. a part of the energy dissipated is emitted as visible light and part as infrared radiation in the form of heat. When the stove cools down, and no longer glows all the energy is now in the form of infrared radiation.In the electromagnetic spectrum infrared rays have a higher wavelength than visible light. Hence for the reason the radiation will have a higher wavelength since visible light is cut off.
Which of the following are characteristics of noble gases?
✅
- An inert gas is one that does not undergo chemical reactions. The noble gases have complete outer shells, so they have no tendency to lose, gain, or share electrons. This is why they are said to be inert.
✅
- Noble gases are the least reactive of all elements. This is because they already have the desired eight total 's' and 'p' electrons in their outermost (highest) energy level.
Inertia depends on mass, the more mass the more inertia.
