When we measure the broadening of absorption lines in the spectrum of an elliptical galaxy, we can infer.

Sending food to a country that has been hit by a hurricane is an example of which foreign policy tool?

sasho [114]

International Disaster Management or FEMA

8 0

4 years ago

A ladder rests against a vertical wall at a point 12 feet from the floor. The angle formed by the ladder and the floor is 63°. C

GenaCL600 [577]

Answer:

length of the ladder is 13.47 feet

base of wall to latter distance 6.10 feet

angle between ladder and the wall is 26.95°

Explanation:

given data

height h = 12 feet

angle 63°

to find out

length of the ladder ( L) and length of wall to ladder ( A) and angle between ladder and the wall

solution

we consider here angle between base of wall and floor is right angle

we apply here trigonometry rule that is

sin63 = h/L

put here value

L = 12 / sin63

L = 13.47

so length of the ladder is 13.47 feet

and

we can say

tan 63 = h / A

put here value

A = 12 / tan63

A = 6.10

so base of wall to latter distance 6.10 feet

and

we say here

tanθ = 6.10 / 12

θ = 26.95°

so angle between ladder and the wall is 26.95°

8 0

3 years ago

Doug is doing work. Without knowing exactly what he is doing, which can be said about the work he is doing?

WARRIOR [948]

<h3>Answer;</h3>

<em>Energy is transferred.</em>

<h3>Explanation;</h3>

Work is the force applied over a given distance, in other words work is the product of force and distance. That is; Work = force × distance.
Work is measured in Joules.

Energy on the other hand, is the ability to do work.

According to the principle of work-energy a change in the kinetic energy is equivalent to the net work don e by the object. Therefore, when work is being done energy is being transferred from one point to another.

8 0

4 years ago

Read 2 more answers

Why construction is present near the bulb

vova2212 [387]

Answer:

The constriction causes the mercury column to break under tension, leaving a vacuum between the bottom of the column and that in the bulb, and the top of the column stays still at the position reached in the body - a "peak hold" system.

7 0

4 years ago

A 500-N weight sits on the small piston of a hydraulic machine. The small piston has area 2.0 cm2. If the large piston has area

weqwewe [10]

Answer:

W₂= 10000 N

Explanation:

Pascal´s Principle can be applied in the hydraulic press:

If we apply a small force (F1) on a small area piston A1, then, a pressure (P) is generated that is transmitted equally to all the particles of the liquid until it reaches a larger area piston and therefore a force (F2) can be exerted that is proportional to the area (A2) of the piston:

Pressure is defined as the force (F) applied per unit area (A)

P=F/A (N/m²)

P1=P2

$\frac{F_{1} }{A_{1} } = \frac{F_{2} }{A_{2} }$

$F_{2} = \frac{F_{1}*A_{2} }{A_{1}}$ Equation (1)

Data

W₁ = weight sits on the small piston

F₁ = W₁= 500 N

A₁ = 2.0 cm²

A₂ = 40 cm²

Calculation of the weight (W₂) can the large piston support

We replace data in the equation (1)

$F_{2} = \frac{(500)*(40) }{2}$

F₂ = 10000 N

W₂= F₂= 10000 N

6 0

4 years ago